GM C5 Vette PID for Fuel Level?

So I have a Jeep body swapped onto a Corvette chassis:
https://photos.app.goo.gl/bzr4UufgfkXAUqpo6

I need to get some sort of fuel level gauge. I can see fuel level in HP tuners on a laptop but I can't find a working PID for it on anywhere else (already tried 2212C5). I am getting tired of having to boot up a laptop constantly to check the fuel.

Anyone know the right PID I need? I am hoping to use the hptuners ngauge.

Forgot to mention this is a 01 Z06 chassis and PCM.

According to this:
https://forum.hptuners.com/showthrea...-guage-voltage
The PCM sends fuel level data over high speed CAN to the BCM and then the BCM sends that to the cluster via low speed CAN. I don't have a BCM anymore. But I can see fuel level in the laptop with VCM scanner.

Quote:

---

Originally Posted by Davidss

Forgot to mention this is a 01 Z06 chassis and PCM.

According to this:
https://forum.hptuners.com/showthrea...-guage-voltage
The PCM sends fuel level data over high speed CAN to the BCM and then the BCM sends that to the cluster via low speed CAN. I don't have a BCM anymore. But I can see fuel level in the laptop with VCM scanner.

---

Did you ever get a solution to this? Just FYI - your 01 Z06 using a GEN III PCM doesn?t have CAN. The PCM outputs fuel level to the corvette dash via SAE J1850 serial data bus.

I also have a C5 Z06, but with an aftermarket dash / data logger. I want to display the fuel level as well. I?m curious if you found a way to do it with MPVI2 and an android device using Track Addict. It is my understanding that MPVI2+iOS+Track Addict doesn?t allow you to scan any data from the PCM.

Currently, I have been using a Kiwi OBDII interface that ties back to an iPhone to display fuel level, PIDs, and codes. Thanks,

I am trying to do the same thing with a 5.3 swapped into a Jeep, did either of you find anything?