Having a bad day... Please help. :)

So I have hp tuners all set up. Did a stock read of the PCM. Saved that file, put it in a secure location. Decided to modify my stock tune. Copied the file to a new file which we will call "modified_tune". From there I went to change Active Exhaust parameters. All is good, I'm happy with my changes so I save my file. I decide to write the tune back to the car and take my first foray into writing tunes and it asks me to license the file. So I select my two credits and license the file. Everything at this point is awesome!

I click the chip icon to write again and now it is telling me I don't have a license. I am confused so I close the window, close VCM Editor, ensure the connections to the MPVI2 are good. Everything checks out. Open VCM Editor, open my tune, click the chip icon for write and it give me the same error.

Now I'm starting to freak out thinking I blew 100.00 for nothing. Anyone have any input or feedback on this issue? I've read all the help files and I didn't do anything out of the ordinary.

https://imgur.com/n4AXP7gl.jpg

11/2/2019 11:26:51 AM
VCM Suite Product: VCM Editor 4.4.4

Operating System: Windows 10 (build 18362)
Microsoft .NET: 4.0.30319.42000, 4.7.1 or later
CPU: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
Available Memory: 5,050 MB


Device ID: 2052354596
Credits Purchased: 2
Credits Used: 2
Credits Available: 0
Licensed Features:

[Specific Controller]
Dodge GPEC2A 2015+, 2C3CDXGJ9FH914393 05035988AE, (2)


ConnectionMethod: USB
ID: 2052354596
HardwareVersion: 1.4.0
ManufactureDate: 1/29/2019 1:20:32 PM
PartNumber: 6230
FirmwareVersion: 2.0.123
PoweredOnTime: 00:11:19
VehicleConnectedTime: 00:10:54
VehicleDiagnosticConnector: 1


Protocol Info: ISO 15765-2, J1962: CAN, 500 kb/s

ECM: 7E8, CAN, ECM -EngineControl - GPEC2A, 2015+ Dodge
VIN: 2C3CDXGJ9FH914393 - 2015 Dodge Charger SCAT PACK, 6.4 L, 8 Cyl
Serial: T00EP2574ZXTUI
OS: 05035988AE
Base OS: G2A15P05V09.0_ENGV09.0_TXXVXX.X
Calibration IDs: 05035988AE
Calibration VNs: F3B96B98
Basic PIDs: 43
Trouble Codes:
Controller Type ID By OS: 21122
Diagnostic Requirements: Init CAN 0x10 0x92
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, ISO 14230-3 Mode 0x22, ISO 14230-3 Mode 0x23, ISO 14230-3 Mode 0x2C 0x21, CAN Listener

TCM: 7E9, CAN, TCM -TransmisCtrl - ZF8HP, Dodge
Serial: T04UN222589935
OS: 68239157AD
Base OS: PRP15000_00001
Calibration IDs: 68239157AD
Calibration VNs: 1FCB0094
Basic PIDs: 12
Trouble Codes:
Controller Type ID By OS: 21060
Diagnostic Requirements: Init CAN 0x10 0x03, Unlock 0x27 0x01 0xAABBCCDD, FCA SGW Bypass
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical, ISO 14229-1 Mode 0x22, ISO 14229-1 Mode 0x23 with FCA SGW Bypass, CAN Listener

zf8 tcm cost 4 credits to license. If you have no plans to tune the tcm do a new read of the ecm and select do not read for the tcm. Otherwise, purchase 4 credits, license the TCM and tune away.

Quote:

---

Originally Posted by Bill@HPTuners

zf8 tcm cost 4 credits to license. If you have no plans to tune the tcm do a new read of the ecm and select do not read for the tcm. Otherwise, purchase 4 credits, license the TCM and tune away.

---

Thank you for the support especially on a Saturday. Doing a write now with the TCM not being read. Good lesson to be learned here. Thank you for your help!

https://imgur.com/qZfCENwl.jpg

And the write was successful! Now she's stupidly loud in "Default" mode. Time to now change up "Sport" and "Track" modes.

Thanks again!