Neural Network Trainer - Sanity Check...
Someone please double-check my strategy here:
The Neural Network Trainer accesses VE tables for several camshaft positions. My trainer file shows a table for five exhaust cam angles, five intake cam angles, and every combination of the two sets for a total of 25 tables. Since the Hemi only has one fixed ("exhaust") cam, there are only five tables used, which are the exhaust cam angles and only the corresponding intake angles.
Here are the five tables I'm planning to use for training (PCM is an NGC4, 5.7 OS):
Exhaust |
Intake |
89 |
139.5 |
98.5 |
130 |
108 |
120.5 |
117.5 |
111 |
127 |
101.5 |
I believe I should ignore the other table combinations i.e., uncheck the box that says "use table for training"
Am I doing it right??