Need stock file for a ram with an 8hp70 w/a 3.92 rear from factory

Hello all. I need a stock file (wish there was a sticky where we can all post our stock files for others to reference). Im tuning my trans and im having over rev issues. Im thinking its because the truck came with 3.21 and I swapped them out for 3.92's and the shift schedules are different between the two. I had no issues until I started bringing shift points up. I did modify my *spedo > tire/gear change* with the hp scanner software already.


Thank you in advance!

Attachment 110939

Quote:

---

Originally Posted by white1

Attachment 110939

---

thank you?

*!
typo

You're going to need some more or back to stock torque management between shifts, (forced spark intervention), I'd bet you are experiencing slip and thats why its throwing p0219 and limping you. Turn on spark torque management in the engine file in the switches too. You don't generally ever have to raise the oss limits in the trans tune. This should bring you some joy and know you aren't burning clutches.

Anybody have a firmer shift tune for a 8HP75, 6.4 Ram 3500