Printable View
I upgraded my to electric fans with a Nelson harness. Fans work fine while the engine is running but won?t work when I turn on the a/c. I tried googling for a solution and found that a common problem that has been stated is that a/c pressure setting needs to be adjusted. But when I hook up my cable I can?t adjust the pressure setting on mine. It doesn?t give the option for it.
Have you set the HP Tuners to advanced view from the edit drop down ? I'm sure it's in there
Look in the System>>Fans. The fan AC pressures are there and like jsf55 mentioned Edit>View> make sure to click Advanced mode.Quote:
Originally Posted by A4edwin
Also check the AC tab > Hardware and research what settings apply to your ride.
Post your fans and AC setting pages.
make sure you select 2 fans, and adjust fan#2 under ac recirculation
What year truck? If its not a 03-04 then you wont have an ac pressure switch to turn the fans on.
Is it possible to run the fans using AC thru the computer without a pressure sensor. Or would it only be possible to just run a relay from the switch.