Swapping LS9 cam to BTR stage 3 turbo cam

I am swapping my LS9 cam to a BTR stage 3 cam turbo cam. I just want to be ahead of the game for start up, I have a 6.0 w/6.2 heads , 92mm tb, ID 160# injectors. I have been running SD for the last 2 years w 78mm turbo, but i am also upgrading the turbo to a VSR 80mm billet/ ball bearing.

My question is what adjustment should i make to my settings to make it easier for tuning for the cam? I know I will have to work on the SD tune Im just looking for advice for the cam.

your spark table looks pretty all over the place and you open loop eq is also prety wacked looking