Read Me! Startup information, how to's & other Tuning Information!

OK I have used the hp software for over 8yrs, on many cars to view, a few to tune. Came to a new situation today, Car is an 08 pontiac grand prix 3800, was bought at auction as a wreck (no key). Car would not do a key learn so I was called to disable vats and make it run before more money was invested. when connecting it brought up the vin, and car info but not the controller or os, had a drop down but the ones i tried all failed. Is this a known issue on some cars, or a red flag to a damaged pcm? I do remember it is a p05 number but no internet where the car is and all I do remember from back of pcm.

Thanks

You can't tune 2008 model year grand prix's with the 3.8 V6.

That computer is a year only controller that uses can-bus, it was never supported because GM axed the grand prix in 2009 and Pontiac altogether in 2010. Only the LS4 V8 computer is supported.

2008 was the first year with CAN-BUS and the only year on that model, was not worth the time to invest for them to support it.

thanks, will quit trying....

I have a 2006 Corvette with a Magnuson supercharger. Which tuner will I need to order to get it back running correctly? JB

Quote:

---

Originally Posted by [email protected]

I have a 2006 Corvette with a Magnuson supercharger. Which tuner will I need to order to get it back running correctly? JB

---

MPVI2 is our tuning product https://www.hptuners.com/product/mpvi2/

This is good info....thanks

Very helpful information out, @Bills, thanks a lot.

Attachment 113952Attachment 113953

1998 gmt400 rcsbss swapped with a gen4 LY5, with 243 heads, fully built 4l60e(close ratio), intercooled torqstorm sc w/ 3.05 pulley, tsp lsa 112 cam, ls7 lifters, tit rods, and dual springs. mid rise intake manifold with 102mm tb. 3.73 gears, g80 locker, 2 piece driveshaft, caltracs