Printable View
I upgraded from 2.24 to 3.0, I have all my sensors working including my wideband except for my commanded AFR. I cant get it to display in my graph in real time. I assume my Channel is correct because my graph is showing my AFR error % compared to my wideband reading, but I would like to see my commanded AFR for reference in my graph as well. I tried all the commanded AFR options I could find in graph settings, none of them give a reading. Help?
Post layout/log.
If you hit the little gear icon w/green check mark when you're in the parameter selector it will get rid of anything you can't use. That makes it a lot easier to pick the right one.
# in this one
http://i1117.photobucket.com/albums/...orials/704.png
why isnt this default on, then you can choose to SHOW ALL if you want?Quote:
Originally Posted by schpenxel
If it were up to me that is how it would be.. I click on that box quite a few times every day and really never use parameter selector without it selected
Thank you for the fix, schpenxel, it is working now.
Since I have your attention, do you also by chance know how to slow down the refresh rate for the wideband AFR reading? It is much faster in this version. It is refreshing very fast and hard to keep track of.
You can't slow it down in the channels list, but in charts/graphs/gauges you can enter a value where it says "Filter ____ ms". That will make it display an average reading over however many miliseconds. I'd try something like 100 or 200. Right click inside one of the windows and go to graph/chart/gauge layout, then find the parameter you're using that you want to slow down.. then mess with the filter time. This only works during live logging and will not work during playback.
Just keep in mind your data is slightly delayed then.. so that can be a downside. I wouldn't use this in graphs, but if you want to use it in charts/gauges it may be easier to see
The reading in channels you can't slow down for external inputs
Thank you again. Been a tremendous help getting used to 3.0!
I have ver 4.xx, and clicking on that gear icon or not makes no difference, the commanded afr channel doesn't come up. However it does show up when selecting channels in the graph.
What can i do??
I do see in the channels equilivence commanded i think it's called, is this the same thing?
Thx