Missing PID for Toyota 86.

I?m running TrackAddict Pro v.4.4.3 on an iPhone 11 running iOS 13.3.
I have run this app on iPhone 7+, and iPhone X running iOS 11 and 12.
I am using a PLX Kiwi3 via BLE protocol from the car to the phone. The same device that HPTuners recommends for iOS devices.
I am using this setup in a 2013 Scion FR-S (Toyota GT86), that has been tuned with OFT.

I have contacted HPTuners directly about this issue, and have received no support, so I turn to the community.

Why can I not monitor oil temp through TrackAddict?

I can monitor that PID through many other apps (Kiwi, DashCommand, etc.), however when using TrackAddict, that one PID is completely missing.

What is required to correct this?

oil temp isn't a standard "mode 01" sae PID, and as far as I know TA doesn't support custom PIDs yet. Those other apps, if I had to guess, probably have a few common extended PIDs programmed into the app and just recognize your car and give you access to oil temp.

Development for this app has seemed to slow down quite a bit (other projects perhaps?), but you'll find that other track app offerings do support custom defined PIDs.