Printable View
Need help with programming a 2-bar map to my car. I changed the tune to one that has this map sensor offset and linear values adjusted. Can someone take a look at it and let me know, what I am missing. In this I have included the stock tune and the tune for the map sensor. I also included two logs from idle to see the map and baro values. any assistance would be greatly appreciated.
Still need of assist
You will want to enable sensed MAP and disable baro learn. Some other changes are listed in the link below.
https://forum.hptuners.com/showthrea...l=1#post574584
thanks I will check that out!!!Quote:
Originally Posted by Homer
okay I tried the figures but still doesn't help. Car starts in limp mode, cant find turn baro learn off feature. My vehicle is a 2007 Dodge charger 3.5
You can give this a try:
Engine -> Airflow -> General -> Sensed MAP = Enabled
Barometric Pressure Learning = Disabled
Pressure Ratio PRatio Max = 2.0
Pressure Ratio PRatio Max Turbo = 2.0
Engine Diagnostics -> Manifold Absolute Pressure Sensor -> Airflow P2172 MAP Delta Hi = 240
Airflow P2172 MAP Delta Lo = 240
Barometric Pressure Sensor -> Baro Voltage Min = .08
Attachment 93935 This is what my screen looks like, anyone can help me that has tuned the dodge 3.5???
Any HpTuners Moderators care to chime in???
That is because you are in the basic view.
Attachment 93936
This is what advanced view looks like.
Attachment 93937
wow thank you so much for the help, Homer, still navigating myself around the programming.