How does the remote tuning work with MVPI2 interface top to bottom?

From my end as the tuner and customers end?

They need to buy basic MVPI2 interface at $299. Can send me datalogs back and forth and upload tune files I write then, nothing else needed?

If Im getting or have the licenses for it - open up the base they pulled out and license or apply right there, and when I email it back to them they can still load it in the car?

If they want to log their wideband to it they would have to get the pro feature set correct - otherwise run the wideband output to AC pressure sensor or something and Id have to configure it so they can log it correctly right?

If you have an MPVI2 and they have an MPVI2 they can read their file and send it to you, you can then make changes without needing a license for the file, you can then save that file and send it to them, once they go to flash it the software will ask them to license the file. So your CUSTOMER would need credits, however you would NOT need credits.

Yes they would need the pro feature set if they want to datalog a analog 0-5v input.

Quote:

---

Originally Posted by Bill@HPTuners

If you have an MPVI2 and they have an MPVI2 they can read their file and send it to you, you can then make changes without needing a license for the file, you can then save that file and send it to them, once they go to flash it the software will ask them to license the file. So your CUSTOMER would need credits, however you would NOT need credits.

Yes they would need the pro feature set if they want to datalog a analog 0-5v input.

---

Ok so no real difference for the guys that have the unlimited license stuff tuning remotely

Quote:

---

Originally Posted by GrannySShifting

Ok so no real difference for the guys that have the unlimited license stuff tuning remotely

---

Correct