Does anyone know if there is support for the 2021 mavericks? The supported vehicle list says up to 2020 for the maverick and up to 2021 for everything else. Thanks.
Printable View
Does anyone know if there is support for the 2021 mavericks? The supported vehicle list says up to 2020 for the maverick and up to 2021 for everything else. Thanks.
Only the ones that use the Bosch ME17.8.5 ecu.Quote:
Originally Posted by DSoutlaw
Okay, makes sense. Thanks. Was doing some research and according to S3 power sports, there was a manufacturing change in November of 2020, and they don't offer ecu tunes for the mavericks after that manufacture date.
Only the RR uses the new ecu, all other models use the old ecu. So, if you buy one to mod, buy the lower one, so you can flash it.Quote:
Originally Posted by DSoutlaw
Okay, thanks for the info.
Mine is a '21 Turbo R and built before Sept '20. So, I should be able to tune it.... correct?
Yes, if it has the Bosch ME17.8.5 ecuQuote:
Originally Posted by XxScottxXN
Does anyone happen to know the model of the ECU that is replacing the M17.8.5 in the RR models? Can Am list their part number as 420464483, but I haven't been able to cross reference it to the Bosch number.
mg1ca920Quote:
Originally Posted by jh122877
I wanted to offer my late MY2021 RR ecu (build date after Nov) is can-am partzilla number 420-464241 has bosch 0 261 S10 15G on the cover. i believe this to be the tricky one that is being tuned via boot/service mode tricks on the board. Hoping this will change eventually. Unable to find specifications or much detail of any kind about this ecu.
Attachment 116644