2019 Ford 6.7L Powerstroke Support Now Available!

https://preview.ibb.co/kMTBsd/HPTos.jpg

2019 Ford 6.7L Powerstroke support now available

HP Tuners presents support for the 2019 Ford Powerstroke

This support is included for both the MPVI and the MPVI2
With our latest version of VCM Suite Beta you can now tune your 6.7L Ford F-250 and F-350
The cost to license the ECM is 4 credits

• Click here to purchase an MPVI2
• Click here to download the latest version of our VCM Suite software

Please note, you will require an active internet connection to tune the TCM but not the ECM

Ford

• F-250/F-350 6.7L Powerstroke

https://preview.ibb.co/g3NCqq/2019-F...oke-square.jpg


For the full VCM Editor Change Log, please see the following link:
http://www.hptuners.com/help/VCM-Edi...changelog.html

For the full VCM Scanner Change Log, please see the following link:
https://www.hptuners.com/help/VCM-Sc...changelog.html


For more information, and to view the latest supported vehicles list, click here.

https://preview.ibb.co/kTdY5y/hptcom.jpg

Darek, possibly you can help me out. I have 2 2018 6.7 superdutys that I can’t view the ecm file. It will pull the tcm file just fine but not the ecm, I’ve tried with both my cables on both trucks.

Does either truck have any tuning currently on it?

Hey ZincGT, first I would make sure that you are using the latest version of our software, having old software could cause an issue. You can find the latest VCM Suite on our downloads page here https://www.hptuners.com/downloads/ . If that doesn't help, you would need to get in contact with [email protected] , they can help you troubleshoot the issue and see why it is not reading the ecm.

One is tuned, the other is not. I was able to get the untuned truck to read with BETA software, however it did not work on the tuned truck.