Just need to set min max ECT for maf fail to stock and also P066 airflow correlation.
Attachment 121854
Your filters didn't work. Use these
Fuel trim
[6215.241]<60 and [2517.161.avg(500)]=0 and [2517.161.avg(-500)]=0 and (abs([50090.156.slope(1500)])+abs([50090.156.slope(-500)]))<2 and ([6310]=7 OR [6310]=9 OR [6310]=14 OR [6310]=15)=0
Open loop WOT
[6215.241]<60 and [2517.161.avg(200)]=0 and [2517.161.avg(-200)]=0 and[6310.avg(1000)]=9 and [50090.156]>98
Maths is fine for closed loop. Didn't check open loop as you had not WOT runs in there.