did you get this sorted
Type: Posts; User: benjohns
did you get this sorted
hi all,
im trying to figure out what table to adjust for my spark advance base there is 4 bas tables that are all a little different.
and a fuel based table.
is this only for gen5 ? i have a e77 V6
can you upload your current tune for use to look at
Any luck with your LY7 tune
Hi all, I'm trying to celebrate my maf on an E77
Having issues trying to turn off pids so I can log maf only with out pe
The other issue is trying to read the maf curve 0 to 500000 hz
My maf...
hi all I have purchased some dw65 injectors of a forum member from his build on his 2016 whipple 300c build he also provided me with the injector data
but
I now have since found out that his...
also the stock tune that comes with the kit is from edelbrock dosnt let you go into pe because of the emissions shit
your map not set to 46.5
your pe is lean as
your fa stoich is wrong
your wot pedal threashold incorrect
send me a pm ill send you a map for your car or ill give you a email to get a greene...
how did you go with the correct data ??
gotta love the lobe
yer it sucks ass
i can try this but I can't find an explanation on what these settings do
ok so what i ended up doing was extend the time from 12 sec to 40 sec i just would like to injoy my lobe for 40 sec before the close loop starts working and fattens up the fuel and makes it sound...
my o2 sensors start working at 191c can anyone guess what temp the o2 temp would be in drive at 1300 rpm
my idea is to increase o2 temp so the close loop dosnt start working intill the car is...
no never touched them they are stock
any idea on what to change them to ??
Hi all
I'm got my cam idling very nice
I'm extend the idle time before the op loop takes over and ulters the cam back to a smooth idle
Is there a way in a 2006 5.7 pcm
To tune off the open...
hay all ill attach a 2006 5.7 300c tune and log to help anyone that needs to its running and idling
some say to remove tb/v x.09 or x.08 to allow more air flow past the tb well this is not...
hi all im looking for some injector data for a
Bosch high impedance EV14 60lb/630cc fuel injectors 0280158298
for my 300c
does anyone know the
pulse width
injector pulse width vs fuel...
thanks mate ill have a look and see
im looking at the same injectors for my hemi does anyone have the correct data
anyone got any ideas or a copy of a tune they can share
looks nearly same as mine
Hi all does anyone have a 273H-14 or 274 comp cam tune I can have a look at
I'm have a nice tune with my stock cam and blower
I'm in the middle of upgrading the cam
Just looking to be able...