Search:

yea im not sure my override is not set. I am willing to try and mess with the correction tables again but everytime I do it messes up my rail pressure. Commanding 69mpa or 25mpa max. I have 20mpa in...

yes lol I aware of that table im using it in my tune to control fuel rate at low boost. And you are exactly right, when it hits that limit it automatically adds pressure for some reason. Its making...

can you please show where the boost pressure tables are?

No im not sure you understand what I am saying. Yes I understand correction tables, not sure which ones you have but I only have ect and iat correction tables. And iat has a baro axis but it is not...

No I am not talking about the actual pressure not keeping up with desired. I do need to make some changes to the dc table. Its a single 14mm pump with 250% injectors. There is an issue that Im having...

I am logging the main fuel correction reason and timing correction reasons. I have tried many different combinations of rail pressure correction settings. The most recent being stock adder tables and...

So Ive been fighting this rail pressure correction for a couple days now and I cant seem to figure out how it works. It started with stock correction tables and it was not following the pressure...

diesel fueling main injection, pedal map. and main injection limits and governors. part throttle gov.

Im looking to tune a 2008 6.4 for a manual swap. I read the tune and it had the funny pw#1 pw#2 different tables. Which tells me it could be a minimaxx SOFT tune? Would I be able to flip the ...

So I did at first think that for some reason the rail pressure way higher at idle in that other tune and actually tried increasing it by 1000psi at idle and it seemed to have helped and I thought it...

2006 5.9 12mm stroker pump with stock fca and 90hp injectors. Im experiencing a rough idle and white smoke after a cold start. It is tuning related because my truck was also tuned by firepunk and I...

Can I change tire size in HPtuners for a 04' GMC Yukon and do I need to buy credits to flash the pcm or can I use the scanner to change it?

whoops lol

Can I change tire size in HPtuners for a 04' GMC Yukon and do I need to buy credits to flash the pcm or can I use the scanner to change it?

If you zero out pilot pw it will not work at all. Your pikot pw controls your pilot injection. What you want to do is zero your pilot correction table past 150* ect. I did it with sone playing...

This is all the cylinders

87634

What do you mean by os patch? Like hptuners update?

Yeah I logged my buddies smarty s06 sr

they are all low like 0-1mm3. Would it be the corresponding cylinder that is giving the issue and #6 is the one compensating or am I thinking to deep into it.

Wait you can only log tunes from hptuners now? Like if I had a smarty I couldnt log it like before?

I have a high injector balance on my #6 injector of like +3.8 - 4.0mm3, is that the one I would need to replace?

I had an issue with my 06 that prevented it from being read because a tuner disabled the read function. I also have issues sometimes where my credits dont sync with my hptuners. Try going to Help >...

Boost limit A.

I have an 06 and has a cold air intake and 5" exhaust. Just looking for a little extra power at the top end...just a little street tune

hey Jim mind taking a look at my tune in the tune critique thread?