Looks like your Mustang5.0auto SUS.hpt is a locked tune.
Type: Posts; User: K44
Looks like your Mustang5.0auto SUS.hpt is a locked tune.
I understand exactly what Vlad is saying. Sometimes the DBW system over rides what I want. This is mostly noticed on a race track.
I would prefer a cable throttle, at least then I know what the...
I think this is complete
Post up your tune, someone might try it.
It may be tuned and locked
Figured it out,
Care to share what you figured out?
Many of us have never seen a gen 1 truck
Bad RPM gauge?
Mine did the same as in the video, I had to re-install windows to fix it.
I fixed it by wiping the computer and re-installing windows.
I hope this doesn't become a pattern.
17 Mustang GT
5.1.8 works so it is not my MPVI device.
My scanner no longer works
Post your tune.
Off the top of my head would be cold fueling table or stoich set wrong.
If that is true you need to retime the cams, one is off a tooth.
How?
"I disable all snap points and created snap lines between all the points I described above."
Can you give an example of this?
Say you are using map points 10 13 15 17 19 would you run the line...
I've come to the conclusion to just leave them on. Figuring out and then using gen 1 mapped points works, so does using 3 cam settings.
1)Idle 0,30 2)driving 0,0 and 3)OP what ever you like.
...
Try adding some overlap. Look at a GT350 cam tune file for ideas.
I would open the intake cam at -20 from 2000 to 4500 I'd run the exhaust cam at 20 from 1000 to 4000 then 15 to 7500. Might drop it to 10 this would have to be tested.
Should help
The truck manifold is designed to give a torque bump in the midrange area. The 18 up truck manifold is far better than the 18 up GT manifold in the off idle to 6500 range. The 18 truck will pull to...
This is what I found. I have several FRPP tunes but I don't know which are stock unmolested.
This also makes me wonder what changes need to be made for other intake manifolds, like the Boss or...
There are a few things that make it shift at WOT. Post your tune. If you are worried post the stock swap file. It's the tranny I need to see
Veefour, Do I need to tweak the SD tables when using a VooDoo manifold on a gen 2 5.0?
Yes, very easy to do.
Posting a tune is pretty easy. Click go advanced and navigate through.