Search:

Is there a way to do this to help spool on a TT car? If so where can I find that or what's it called? :-)

Sounds like I need to adjust the Engine Toque OP and Inverse to have a load over 2.0?

Hello all! I have a Twin Turbo 2013 5.0 that was all tuned up on the 60mm turbos and running great. Swapped to Precision 6266 (Only change) and now when I go into boost it seems like I'm having the...

Fore innovations makes one too:

https://www.foreinnovations.com/ProductDetails.asp?ProductCode=39-100

The old LS2's from "down under" had a interesting feature called lean cruise mode. Which meant with light throttle it would bump the AFR up to about 16:1 for better gas mileage. The EPA didn't...

So how would one go about swapping strategies? Just grabbing a base tune from another strategy and spend 2 weeks re-entering all the changes????

I'll have to go test this out also then. My thinking is if you subtract the overlap you are injecting it more when the exhaust is open, therefore you smell more gas. If you add your overlap the...

So it would seem like based on this:

http://www.hptuners.com/forum/showthread.php?t=12605&highlight=injection

my theory might be correct? So in doing that, adding your overlap degree to the...

Hi Andrew,

I spent some time trying to figure it out also. Still no good info but here are some links that kind of help for a LS1.

http://www.hptuners.com/forum/showthread.php?t=18549
...

I would appreciate it also. Most of those show when the pulse should finish, does that mean that angle - pulse width tells when it fires? Also the Min/Max are 0/1024. That doesn't make much sense...

Hello all. I've got a LS2 with a cam that has 15* of overlap. How would I at idle and just off idle adjust the injector timing to try to keep most of the gas from escaping out the exhaust valve? ...

You should be able to create a signed driver by following this guide:
http://www.minasi.com/newsletters/nws0903.htm

Once the driver is signed you will have to import the certificate on your...