Search:

Type: Posts; User: bxxfab

Search: Search took 0.00 seconds.

  1. Replies
    7
    Views
    802

    OMFG I should know better. I used my own scantool...

    OMFG I should know better. I used my own scantool to check datastream, saw no cam sensor counts. I guess I shouldnt have been wiring this car up on a 19hr caffeine and tylenol induced binger. Right...
  2. Replies
    7
    Views
    802

    Ok, changed P0513 as noted, still no change....

    Ok, changed P0513 as noted, still no change. Verified wiring at ECU again, even backprobed. Ground, Voltage all good. Park/Neutral signal valid at ECM, so it brake switch. Im at a loss here. Perhaps...
  3. Replies
    7
    Views
    802

    Have power during cranking on all circuits. Live...

    Have power during cranking on all circuits. Live data shows engine rpm during cranking too. Fuel pressure solid 55psi,

    Brake clean down the intake, doesn't even attempt to start, so no spark as...
  4. Replies
    7
    Views
    802

    E67 VATS Help! No start

    Having an issue. 4.6 Northstar LH2/6L50 swap into a CTS. No start, no injector pulse. Am I doing something wrong? Changed VATS Patches to disabled, along with starter diagnostics and clutch interlock...
  5. Replies
    1
    Views
    3,139

    3100 pcm question

    Short story, Im looking to convert a OBD1 3.1MPFI engine over to use a 97 or later year 3100 PCM (i.e. Lumina) so I can tune via HPT. The 3.1 MPFI uses only a 7x crank sensor. I can easily add the...
Results 1 to 5 of 5