How about a list of your mods with cam specs?
Type: Posts; User: morepowerjoe
How about a list of your mods with cam specs?
So how would you get the start up airflow to last longer?
Thank you sir.
Ok, I see what your talking about. Thanks again Cringer
Could you explain a little more on where in the tune file the maxes are for maf and map and how do we log that in the scanner? Thanks Cringer
With or without a filter and how many cell hits do you recommend?
So after I got the zones dialed in what's the next step? Do I then try to blend zones together?
Ok, thanks guys, I really appreciate your help.
Ok so I got that down but what I don't understand is after I fix this lean spot and hit calculate coefficients it goes back to the lower value again messing up the flow of things. Does it even matter...
So when I copy and paste multiply % by half into the VVE table and then calculate coefficients do I then interpolate the larger to smaller errors to smaller to larger errors and then re calculate...
Thank you so much Greg.
I'm really confused with all these filters circulating around. I really just need to know which filter to use in the scanner for DynAir tuning with the MAF CL and the VVE CL. Could someone please...
Oh no you where thinking I was using the traditional way of tuning the MAF and VVE but I am in fact trying to use the DynAir to tune the MAF and VVE stuff all at the same time. Sorry for the...
Thank you for the info. I have more questions but I'll ask them a bit latter.
So my current settings for the high rpm disable are set to 400 rpm and high rpm re-enable to 300 rpm. If I set my high rpm disable and hi rpm re-enable back to stock will it change the way it...
Yeah I got a cheap a** laptop for $220 that I've been using, not the best but it gets the job done most of the time. Now it looks like I can get three times the laptop for around $500 from Newegg....
So when I was logging I was using Cringer's math expressions using only the stft. I don't know if that matters or not but I am logging ltft so I just changed the math expression to the one with the...
I think it might be my darn laptop being so slow, because every since I installed those graphs in the scanner it has slowed down my laptop significantly. I'm thinking that when I open up the scanner...
When I use that filter you pointed out I get no data in my graph. But when I use Cringer's original filter it populates data. Does it have to do with the fact that I'm only using stft in the math?
Yes thank you.
Thank you Sirius again for your help. But I think I have all that down I just don't understand the PE error stuff and what to do with that data from the scanner. I understand what power enrichment is...
Hey guys so I've been trying to follow along with your threads "tuning maf and vve at the same time" and "what is dynamic airflow" but I am just barely grasping the concepts. I So I think I have a...
Thank you Sirius
Thank you sir.
Is the filter formulas you have in the graph on the video for the maf closed loop accurate. Or where can I find the filter formulas?
Thanks