Try again/harder. Adjust the throtte (body) stop screw until you get 0.5v at idle and around 4.5v at WOT.
It might not solve your issue but do it anyway. That's ^ idle and IAC basics.
Type: Posts; User: Mr. Smith
Try again/harder. Adjust the throtte (body) stop screw until you get 0.5v at idle and around 4.5v at WOT.
It might not solve your issue but do it anyway. That's ^ idle and IAC basics.
Thanks.
Sh*tload of info I need to reread 25x for it to sink in..
Will start............... now.
(I'm not the OP btw)
(I f-ing hate this burst knock and knock learn factor SH*T)
(I can't...
In case this helps:
"IAC Relearn Procedure
If you are having idle issues you may need to reset your Idle Air Control (IAC) and TPS, do this before you start drilling holes in your throttle body...
So could me pretty-much disabling Burst Knock be the reason why my Knock Learn Factor has sat on 0.75 for the last 5 years?
'01 Commodore knock sensor sensitivity Cyl ID#0 at 4,000rpm = 6.5
'01 Commodore knock sensor sensitivity Cyl ID#1 at 4,000rpm = 15
'01 Commodore knock sensor sensitivity Cyl ID#2 at 4,000rpm = 6...
to other cylinders and car models and why hasn't anyone written anything about it online?
Is it because of different front accessories, brackets, configurations, headers, RHD...?
Eg.
'01...
If any dumba$$ doubts me (about widebands) just google "hp tuners wideband problem".
Page after page of frustration, confusion, difficulty...
Yeah.. noobs are better off with a wideband :rolleyes:
You're an idiot, giraffe face.
Over 9,000 posts of telling people they need to buy a wideband and that they should "properly fail" their MAFs and tune their good-for-nothing VE tables.
Every...
Rubbish/BS.
Rubbish/BS.
Sounds like you aren't talking about a Gen 3 engine. This is the Gen 3 section.
So what exactly have you gained from all the headaches and money you spent on it?
Do you think it was all worth it?
a) You buy another one and replace it.
b) You'll still be able to drive your car.
c) What happens if your MAF never fails? You just wasted your time.
d) My post is for HPT noobs. They don't need...
They don't? What, is there a 5 second delay or something?
So narrowbands aren't tools/parts and there to help too?
How much more accurate are widebands would you say? 0.5%? 1%?
I've read...
I think you need to open your eyes and see the countless amount of topics regarding wideband problems.
- I know you're fooling around, but I don't want this getting off topic... I want to get my...
Source? Proof?
Doesn't matter. End of the day, widebands are a pain in the ass (and so not worth it) for the average DIYer/car-modder. And I think most wideband noobs think installing one will be...
What exactly is dumb about my post? You saying my post is dumb is pretty stupid and ignorant. Good for you for not having issues with widebands for 6+ years. YOU'RE A PRO TUNER. You don't count....
problems
and I just noticed that right under that section is "VCM Scanner External Sensors" with the majority of topics = wideband problems.
WTF?
Why bother with widebands if you're not a...
OP are you still around?
Have you fixed the problem?
How old is your car? Engine swapped?
Have you checked the volts at the battery and alternator?
It seems that volt readings through OBD2 ports...
Ugh. Repeat/repost from just 14 topics below:
Controversial tired asf right-before-and-in-bed post - incoming!
Don't waste your money on classes, books... Absolutely unnecessary to anyone (average guy who just wants to tune his car) with an...
I've bumped into and read this article http://www.autospeed.com/cms/A_111109/article.html?popularArticle a bunch of times over the years and it's always made me very curious, excited, hard...
It...
Are you trying to tell me that "veeefour" is asking for automatic beta updates only and not full/all versions?
Are you also implying that if HP Tuners grant his wish, I won't have to sit there and...
Hell no.
I'm happy with my 3.xx version. I don't want to wait for useless (to me) updates every time I use HP Tuners and cause me problems. I don't know why so many of you bother with and obsess...
Say what?
Have you added and tried all the Throttle Position pids available in your Channels list?
The throttle position % pid that works for me / my LS1 is "Throttle Position (SAE)". 0-100%....