Search:

Type: Posts; User: mercrising

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds; generated 39 minute(s) ago.

  1. I'll try that cam logging when I go back. ...

    I'll try that cam logging when I go back.

    Swapped wires to work with truck TB i believe, seems fine in scanner and throttle responds with no codes.

    Current Performance harness.

    Could just be...
  2. Yet another LS3 "swap won't stay running" thread, bag of parts...need help plz!

    I pick up and help a lot of DIY'ers and am one myself, small time tuning and just enjoy helping get stuff running!
    Anyhow, I end up with lots of tunes with a conglomerate of parts, as I am sure some...
  3. I am about 3rd in line on this PCM, and they just...

    I am about 3rd in line on this PCM, and they just said "will work with truck file". I very likely did flash over the old stuff at some point...whoops.

    I suspect if I'd call the vendor this coming...
  4. t43, how to force TUTD table reference canbus and shift mode

    Swap jeep, using Xtreme Trans canbus adapter, and was originally set up to go into d4 or d5, then cruise lever would become momentary up/down signal. The d4 or d5 readout depends on what trans...
  5. Replies
    0
    Views
    279

    Looking for stock 1999 Cobra file

    Looking for a stock 1999 Cobra file so I can prep before I see the actual car.

    Can anyone share one with me please?

    Appreciate the help, I didn't see on in repository.
  6. I haven't yet! Been pouring money into v3 of that...

    I haven't yet! Been pouring money into v3 of that sill truck in my pic. :)
  7. 2008 Silverado e38 ECU using Ford GT500 injectors, and DSteck's conversion sheet

    Hi all, I am hunting some validation of correct Ford M-9593-MU52 injector data conversion and use in this 08 E38 ecu file I've attached.

    I believe I input the data into Dave's sheet on tab one,...
  8. Replies
    9
    Views
    2,618

    Post the logs and file. Mine was mechanical no...

    Post the logs and file.

    Mine was mechanical no doubt about it.
  9. Replies
    9
    Views
    2,618

    Found issue to be the Spectre 90 elbow into the...

    Found issue to be the Spectre 90 elbow into the TB, coupled with factory land cruiser air box and filter, was collapsing. Not a ecu or trans cal issue at all.
  10. Replies
    9
    Views
    2,618

    Any luck here guys. I am in a situation fighting...

    Any luck here guys. I am in a situation fighting some WOT no shift issues on e67 and t43. These ECU's were manual GMPP controllers first, now paired with t43 6 speeds, but don't want to seem to shift...
  11. I found Magic Motor Sport, they have their Flex...

    I found Magic Motor Sport, they have their Flex hardware which is pretty extensive for $1000 pounds, then StageX is their editing software at a monthly rate or some beginner pricing to get your feet...
  12. 2018 Allroad B9, w/ Simos 18.4, is there an ETA for support by HP Tuners?

    Started a new thread since my other was mis-titled and I can't change it......

    Is there an ETA on Simos 18.4 support, for the 2.0l TFSI in my 2018 Audi A4 Allroad, and a TON of other vehicles??
    ...
  13. Replies
    7
    Views
    2,479

    Good catch, I meant a 2017....changing title now...

    Good catch, I meant a 2017....changing title now :).

    After looking at them closer, I feel like I'd be pissed at the 16 interior and tech. 2017-18 is what I am looking into actually. :yay:
  14. Replies
    7
    Views
    2,479

    Anyone have a newer 2.0t file from an A4 is might...

    Anyone have a newer 2.0t file from an A4 is might look at, stock is fine?????
  15. Replies
    7
    Views
    2,479

    I see lots of other tuning options for the B9...

    I see lots of other tuning options for the B9 platform, so I'd hope HPT is on the boat too.

    I plan to test drive one and see if I can pull own the file.

    Any partucular procedure to download...
  16. Replies
    7
    Views
    2,479

    2017+ Allroad 2.0T support?

    Looking into the Audi supported vehicles list, I do not see the Audi Allroad called out specifically as being supported.

    Do they fall under one of the A4 class vehicles that do appear to be...
  17. Must have fat fingered a paste or something along...

    Must have fat fingered a paste or something along the way......MAF was way out down around idle so air measurement and idle were jacked up too.

    Silly, but got it the other day not long after...
  18. Stock g8 6.0/6speed swapped into a Rover Defender 90....IDLE HUNT IN PARK..STOCK!!

    Hi gang,

    Hunting resolution to a swap I am working on into a Defender 90 with an E38 ecu and all the parts from the same car except the air intake and a lokar DBW pedal.

    Issue is that it runs...
  19. Swap won't go into PE.....cannot find the culprit

    Hi gang....I have done quite a few gen 3's but, I recently worked a gen3 p59 pcm, on a swapped lq4 in a range rover, with a 6l80 on a standalone controller that stumped me. Tuned up OK but...I...
  20. Just started reading into this gen5 stuff but,...

    Just started reading into this gen5 stuff but, this link in the read me at the top of this forum page seemed in the arena of your issue. It explains the new architecture and flow of the gen5 ECUs.
    ...
  21. Replies
    8
    Views
    5,310

    Say, little down the road but, y'all get this...

    Say, little down the road but, y'all get this figured?

    My scanner seems to stop logging after a 1-2 minutes of logging, then loses connection and I have to re-establish by cycling the usb or obd2...
  22. MPVI:cables, drivers,obd2 on vehicle side. What's causes channels to drop in a scan?

    Gen3 p59 controller, VCM Scanner finds and speaks to the pcm via obd2 just fine, log and within 1-2 minutes I lose channels it seems.

    I have to break connection with laptop: USB in/out, change...
  23. Had to register my device under my HPT use...

    Had to register my device under my HPT use account online, which then created a new key when it associated the box with my account. I put in the new key, seems to work.

    Side note, just burned...
  24. Unlimited on mpvi1; Getting Unlicensed Vehicle and or Invalid App Key

    Cannot get an unlimited gen 3 mpvi box to flash, getting invalid app key and unlicensed vehicle messages. Updated software couple days ago, just now tried to flash with it. Seemed to read ok, went to...
  25. Bump...anyone have a trouble shooting tree for...

    Bump...anyone have a trouble shooting tree for TCC lockup?
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4