Your right I’m a idiot, I forgot she won’t log map, so the logs show idling are 15 kpa so that’s where I was adjusting
Type: Posts; User: Dustinjv
Your right I’m a idiot, I forgot she won’t log map, so the logs show idling are 15 kpa so that’s where I was adjusting
And that fuel map I sent is 100% stock fueling other then 15 kpa section, that’s only a text map
It’s only to rich at idle, normal mid throttle isn’t to lean, 15:1 at times. I’m not worried about that currently, and it’s a 130 more hp then stock, it needs more fuel off idle.
I don’t have a current log file; she’s fully built, 9.8:1, scat crank, roller cam, head studs, ported & polish; anything you can do to a 4.0. Zero short cuts... I build Porsche race cars for a...
They are new to the motor accel injectors, motors been running for a year with them now. Fuel trims are reading zero, before I locked out closed loop they were at 8%, which I initially took out 10%...
They are 29# injectors, stock was 21#. I’m going to try touching the cables tonight.
I’ve got a redundant coolant temp sensor, they read within 5 degrees of each other, still a oem mopar sensor; and I’ve reset adaptives with scan tool and by pulling battery. That’s also what I was...
Yes she’s reaching full temp and out of the 120 sec warm up window.
here it is, thanks for the help
102007
Min pulse has been changed, currently at 1180 from 1600; zero chance shown at idle.
Ive been running a jeep xj built 4.7 stroker for around 1 year now, Its been on Hp since October. Finally desired to correct the fuel trims by locking out closed loop, pulled the O2 and disabled....
I’m currently running 28 with no issues, also running way leaner wot currently at 13.2.... I only run 93
I had that same issue once after I forgot to turn the key back on after it says to cycle it; I just restarted to download with no issues. She’s always going to run funny after a new file is uploaded,...
Have you updated to the most current version; I was having trouble logging too. Now it’s perfect
24 hours or so, they are super helpful with anything you need.
I had the definition failed to load; had to put a case in. Your probably the 1st person with that particular file and it needs to be released by hptuners.
Dlc_racing hows she running so far? I was comparing our stock files, look pretty similar; small changes probably because I?ve got a auto. How?s she running with your adjustments. I don?t have my...
P0700 is coming up due to lost communication with tcm/cluster during flashing. Mine is doing the same thing, after 2 key cycles it?s been going away.
I?m not currently in boost, but I?ll will to know this too. I?ve got a whole setup, just haven?t had time to finish it. But I do have a stroker 4.7 big cam, and lots of port work. She?s currently...
I?m having same problems with logging my 98 xj. I?ve sent a case and they are definitely working on it. Can someone steer me in the correct detection on what?s base spark egr on and off. These...