Search:

Type: Posts; User: mJolnir

Page 1 of 11 1 2 3 4

Search: Search took 0.00 seconds.

  1. yes, the owner of the car lives in a different...

    yes, the owner of the car lives in a different city from me so write entire is out of the question now, he sent me a dyno ''log'' he made with a ngauge and it is still reading 9% alcohol with that...
  2. i also tried this configuration 93520

    i also tried this configuration

    93520
  3. 2018 mustang gt not learnnig alcohol content

    it only has a jlt intake, i used a 2018 f150 values to fill the FF tables, got the car to not showing any range left and added 5 gal of vp racing x85, the logged alcohol content never went over 9%...
  4. Replies
    11
    Views
    1,429

    Is there anything in particular that jumps at you...

    Is there anything in particular that jumps at you from the logs?

    I do want the system to work as designed
  5. Replies
    6
    Views
    215

    Did some more logging, added actual and expected...

    Did some more logging, added actual and expected torque to the pids, and actual is higher than expected, could this be causing my shifting problems?

    92752
  6. Replies
    6
    Views
    215

    Ok so i finally got to wok o the transmission...

    Ok so i finally got to wok o the transmission worked getting a bit more pressure on the shifts, and trying to get her to shift faster bur i still got the tranny hitting the rev limiter at 7k rpm,...
  7. Something i checked, i always got that huge...

    Something i checked, i always got that huge negative number whenever i was correcting the idle area of the VE, if i copy pasted error % it got screwed, so i tried to multiply the area by a single...
  8. Replies
    11
    Views
    1,429

    well i didnt log any toque stuff on the track,...

    well i didnt log any toque stuff on the track, ill keep that in mind next time i go, but i did log them at the dyno, dont know if its any use in this situation.
    92708
  9. Replies
    11
    Views
    1,429

    Throttle closing on gear changes

    went to the track this weekend, tack prep was not that good, but noticed that that the car seems to be closing throttle, shutting the injectors and pulling timing in all the shifts, making the car...
  10. Replies
    6
    Views
    215

    it does not present me with options to rear or...

    it does not present me with options to rear or not the TCM, when i selected "read entire" it justcame with whhat you see i the file ''tune0'' that i uploaded on the first post
  11. Replies
    0
    Views
    111

    Is the 2017 GTR supported?

    In the ecu list when an unidentified ecu is connected i see the 2011-2018 nissan GTR ecu listed, does this means i can read and write it?
  12. Replies
    6
    Views
    215

    So no ideas o how to make it shift properly?...

    So no ideas o how to make it shift properly?
    took the limiter u to 7000rpm and still will bang on it i 1st gear if i use launch control, and on the 3-4 shift if i just go wot
  13. Replies
    2
    Views
    179

    2017 Jeep Grand cherokee STR8

    Does the TCM needs to be sent out to unlock to tune the transmission on this truck, i dont get the option to read it.
  14. Replies
    6
    Views
    215

    Jeep srt8 magnuson Q's

    This is my first supercharged dodge its forged internals and a magnuson SC, MY2017, it came to me with a tune from whoever sells the kit, sometimes when im braking i feel like it tries to push as if...
  15. Replies
    56
    Views
    5,386

    Ok what is this boundary stuff, because that...

    Ok what is this boundary stuff, because that negative thing its a pain in the ass, if i try to take 5% off from the idle area it goes crazy negative numbers and i have to go back into the VE...
  16. Replies
    5
    Views
    406

    i thought that was IAT2 but now i see IAT2 is...

    i thought that was IAT2 but now i see IAT2 is falling for the whole pass. Looks like its time to add some water injection.
  17. Replies
    5
    Views
    406

    What is pulling the timing here? (lt4)

    the car is a c7z06 auto, it has a AFE intake, LT headers, O/R x pipe, 16% lower pulley and borla noisiest exhaust, yesteday we had a 1/2 mile event and the owner said it felt like it was nosing over...
  18. Replies
    2
    Views
    345

    Sure thing, here is the stock tune, and the base...

    Sure thing, here is the stock tune, and the base procharger tune that the car had when i started working on
    90695
    90696
  19. Replies
    2
    Views
    345

    School me on torque/inverse tuning

    I had this car a while ago, it was a v6 mustang with a vortech supercharger on 9psi and a torque converter, the car would shut the throttle on max effort launches at the track. I was told that my...
  20. Replies
    1
    Views
    197

    Livernois unlocked pcm

    Hello,
    Has anybody tried tuning a livernois unlocked pcm?
    i have a customer that wants to tune a trackhawk and it was previewsly tuned by them.
  21. Replies
    3
    Views
    514

    throttle closures used to be a problem before we...

    throttle closures used to be a problem before we had the [ECM] 19614 - Overboost TIP Saturation parameter as the TIP spikes when the throttle closes and it went beyond what the sensor could read,...
  22. Replies
    3
    Views
    514

    you will have to remove some limiters, and ask...

    you will have to remove some limiters, and ask for more torque.

    [ECM] 44553 - Flange Temp Inverse i had to change this to 4 in the whole table


    [ECM] 7713 - LSPI Load Limit Hi Effectiveness...
  23. Hey guys, we swapped sensors from another srt8,...

    Hey guys, we swapped sensors from another srt8, still codes, so what we found is that on the phaser limiter install the guy took all the bolts out and the spring came out flying, so we bought a new...
  24. Replies
    3
    Views
    431

    fuel quality wasnt that good 89719

    fuel quality wasnt that good
    89719
  25. It does have a phaser limiter, the car started...

    It does have a phaser limiter, the car started giving me "crankshaft sensor/cam corelation" code, and lately is givig me a camshaft position sensor code, im starting to think maybe cam timing is a...
Results 1 to 25 of 253
Page 1 of 11 1 2 3 4