Search:

hi, 2010 Ram 1500 5,7 give me some issues, as the PCM set DTC0882 and a the according pressure sensor faults. Its confirmed that the PCM is defective.

i read the PCM and saved the file, can i just...

Hi, can a transmission relearn be done via VCM Scanner on a 2012 Ford F150 Raptor?

thank you

ok, update, full story

the transmission was replaced with a new one, so it seems that the Trans...

hi folks,

i have heard, the newer( 2012 up) ECMs are different, US and Euro spec....and they Euro version cannot be tuned with HP like the US Version...

background is, friend of mine wants a...

hey Boostjunky

so you think, we have a kind of resonating problem here...swings start out in CL and continues in open loop...it s no problem to set to open loop anyways...
i run a wideband, its...

Hi

around at minute 4.20 .....3000rpm to 5200 rpm....

regards

hi guys,

thank you for your replies....i will set it to open loop and see what happens...unfortunately, i have this condition in PE Mode also, where normally the o2?s are ignored...

thank you

thank you in advance...

i have adapted Engine>Torque model>Monitoring>Torque>Torque/Airflow Factor...maybe please take a look

thank you

Hi Boostjunky

thank you for your reply, appreciate it

i decrypted the camshaft, its a Compcam with 275/283 adv 226/[email protected], 344/352 lobe lift

tried to force open loop, setting WOT voltage...

hi...

finally i managed to get the car running

its an 2009 SRT Jeep 426 stroker wiht Vortech blower at 6psi, cnc heads a healthy cam and 3000 stall converter

car is idling perfect, throttle...

hi all

we built a 9:1 426 Hemi Stroker with a healthy cam and a Vortech v3 blower

following problems...

as soon as the car goes a bit above afr 14, it sounds like firework in the exhaust......

hi all

does anyone have a stock file for a 2006 SRT-8 GC wirth trans parameters?

regards

hi all

i want to tune a heavily modified 2005 Jeep 4.0 (stroked to 4.7, cnc head, cam, intake, headers, etc..) to shift later for better use of the powerband.

so, regardless what i write in the...

hi all

we repinned the PCM on a 1999 Corvette to a PCM from 2001...this was a PCM from a 4.3 V6...

we loaded a stock calibration from a 2001 car on it, it started on the first try...

some...

Hi Guys

helping a friend with his C5 where a P0601 appeared....

he purchased a "new" reman. PCM form a 2002, we are now repinning the connectors

i was also able to read out his stock PCM,...

Hi all

as you guys know, when you cannot read out a 2012 6.7 ecm, you are supplied with a stock file.
as stated by hptuners, you just can flash in the modded file, the patch seems to be applied...

hi all...

the car runs godd now ( for what it is), it still doenst make the power that it should, but thats another story..still too much stock parts for a not stock motor

heres what i did
...

Hello!

yes thats right, i left it unchanged, because when you alter this value, ESP and TC are no longer functional..

its interesting, that HPTuners uses engine size and engine displacement.
...

hello, Thank you for chiming in..

This ECM seems to use no ANN, no button in the Airflow chart

i actually tried to flatten out a bit the idle VE but that didnt help much..per my log, MAP isnt...

Hi Russ!

ok, Thermostat is on the list...sometimes im wondering about myself, i put 180F thermostats in all the older cars that used Tunercat, maybe too mcuh respect for touching newer...

Hi all

i purchased HPTuners a time ago for tuning my vette, which worked out nicely, now im in the process of tuning a friend?s SRT8 426 stroker..and this gives me some issues..

the engine...