https://www.diablotoona.com/tablet/index.html
Johan Mengs. Ex Diablosport. Brilliant tuner. Got my sprintex jeep running
like a top after dozens of tunes from the vendor. If you have a rip rip...
Type: Posts; User: sajkwrangler
https://www.diablotoona.com/tablet/index.html
Johan Mengs. Ex Diablosport. Brilliant tuner. Got my sprintex jeep running
like a top after dozens of tunes from the vendor. If you have a rip rip...
OK will do. Can I post a diablo log as I have the trinity all set up for the wideband and have not done this for the HP tuners scanner yet.
I queried that. ANN is definitely on. HP Tuners support say that the switch is inactive on this platform. Yes really. The guy who tuned it is very well known on the Chrysler platform and did not tune...
Absolute newbie here. I purchased HP tuners to start doing small things to my Jeep 3.8 with a blower. So far I have managed to make the cruise control usable again and the vehicle much more drivable...
So my vehicle is PD boosted with NN on. When I look at the NN settings in the tune I see PRatio Max still set to 1 and VE max set to 100%. As I understand it these settings probably limit the NN...
This forum is sure quiet.
To clear this up support finally said.
"To clarify, The switch is set to disabled, but does not function in this OS. The NN is actually ON."
Also what would likely happen if I turn it on. Badness?
Hi,
This shows up as disabled in HPTuners 3.6 Support are saying it is default disabled on this platform. I am assured that it is in fact enabled. My Jeep was tuned by Johan M (Diablotoona) before...
Thanks for the reply. Tire size is set correctly, speed is accurate to GPS it shifts with no issues and does not raise a DTC. It definitely thinks it has 3.73 gears though and it has 4.56 so I am not...
I will get a log in the next week or so. Thanks for your response. Yes the bypass valve working fine. Problem is that when it goes into boost the valve closes and the transition to boost is not...
On the 2011 (3.8) where there is no Ramp Rate setting that I can find what would you recommend to reduce the jerky drive and cruise control surge as it goes into boost. Tune attached. I have tried...
42rle actually. Its not so bad in the later years as long as you don't cook it. As far as I know the only people who have any proper tuning for it are superchips but then you have to use their tune...
As far as I know the JK uses the abs tone rings to calculate speed and make transmission decisions. I see HP tuners vcm scanner gives you the ability to change the gear ratio where diablo does not....
OK set all those tables back to stock along with flow factor min. Did not really help. What is the relationship between the various pedal tables? I assume the the wheel and flywheel ones are for some...
Jeep 2011 Wrangler 3.8
When I used to flash it with the Diablosport device it was an organised process with a few dings. I had a cable fault at one stage and halfway through the flash the Jeep...
Will do.Thanks
Do I also see there that above 2.196 volts at the pedal is considered WOT?
Wanted to see if anyone had experienced anything similar. HPTuners shows my 2011 Jeep JK 3.8 as having neural network disabled. It is not.
If you download any stock 2011 Jeep JK tune file from the...
Thanks will give it a shot on the weekend.
What does Idles horrible mean? Is it rough does it miss, hunt all over or what.
Thanks for the kind words
Are my threads invisible or are 3.8 blown jeeps boring? This community seems unlike the jeep community. I was hoping to get advice here but after 3 threads without a single reply I am thinking I...
Hi, Brand new to hp tuners. This is the first read of my PD blower Jeep JK 3.8. I have a problem with surge and over throttle sensitivity as it rolls into boost. Makes it kind of hard to drive...
Have placed my hptuners order. This jeep has a positive displacement sprintex blower and can be quiet difficult to drive smoothly. It also surges in cruise control as it drifts into boost and the...
So I have this vehicle and it has been tuned using CMR by a well known person. I am considering purchasing HP tuners to make small changes myself. Is there any decent documentation on the Chrysler...