Search:

Thank you Greg,
I will look into that when I get home tonight. I appreciate you help and your patience.

Scott

I found a video by Matt Sanford ( https://www.youtube.com/watch?v=1QIRgaGfzWk&list=PLpu6GsSJ4YNptvZXGNpAVrEWpXxsAEODi&index=9 ) and I followed these steps. Truck starts and runs ok. I made a log of...

Am I supposed to switch these tables to g/s and add 2-3 to them or add 2-3 to the table the way it is shown (lb/hr)?

142842


Scott

OK I am officially lost. I tried following this write up ( https://forum.hptuners.com/showthread.php?58157-Gen4-idle-tuning-guide ) but apparently everything has changed since that was written...

Thank you Greg,
About to head out and start tinkering in a few. I will update with results and logs as needed.

Scott

Thank you for the response Greg, I appreciate it. I thought I responded the morning of your response but I see now that I must have failed to press send in my rush to get out the door.

This cam...

My brother just did a DOD delete and cam upgrade on his 2007 Avalanche 4x4 with a 5.3. He installed a BTR stage 2 truck cam.
I haven't touched my HP Tuners in 2+ years and since this is his work...

I am trying to read the factory file on a 2018 Challenger. We installed headers, cut-outs, an Edelbrock intake and 92mm throttle body at the shop where I work and they asked me to look at the tune. I...

Hello everyone!
My name is Scott and I have been collecting material and resources to learn HP Tuners for a couple years now. I finally made a purchase for the MPVI2 with Pro set from The Tuning...