I'm not sure you can change the VIN once its in. Even when I worked at the Dodge dealer we got one shot program in the VIN when doing a PCM replacement. I could be wrong, I often am :)
Type: Posts; User: Shizzbee
I'm not sure you can change the VIN once its in. Even when I worked at the Dodge dealer we got one shot program in the VIN when doing a PCM replacement. I could be wrong, I often am :)
I haven't tried that yet. I'll give that a try too and see.
Sent you a PM
89360
No worries, here is the factory Hellcrate Tune un touched.
hellcrate fuel module, Walbro pump, regulator set to 80psi
22.4
Yes completely un tuned. Would you send me stock tune (un modified) and or I can send you mine. I?d like to compare. They should be exactly the same. Can I see a running log too please?
The baro is reading 32.5inhg
Most time when turn the key to the on position I see a Actual Torque value of 1142. This is the same as Driver Demand Torque 1142
The car is cold key on engine off
Hellcrate motor, headers, CAI...
Its a Hellcat with the hellcrate ECU, headers and while I wont call it cold air intake it looks like one. I have a second issue I will post in a separate question to keep them apart.
If you bought the hellcrate ECU and harness kit then the PCM comes unlocked. When in the scan tool all he needs to do is enter 11111111111111111 for the vin and it will take it. If you have a pcm...
This is where I got my local pressure. I believe its not corrected. Please let me know if that's not the case
https://w1.weather.gov/obhistory/KCRQ.html
89170
do you feel these map and baro readings are correct for 32 feet, 75 degrees outside?
See file
Baro pressure at cold, key on engine off is reading 32.5inhg. My baro pressure is 29.98 today, I'm located at 30 feet above sea level, temperature is 75
The engine is a 6.2L hellcat, the PCM is...
makes sense, thank you
I've only looked at Hellcat 6.2 and I only see stock tunes. Does anyone post successful tunes? I'd like to see some to compare.
Thank you, I opened a ticket.
I'm looking under Special Functions and that screen is blank completely. Is it in another area?
Thank you, where is that feature at?
Will the VCM editor do Pedal Learn / Throttle Calibrations?
What are folks using to bench tune? Do you buy old harnesses to connect to the pcm?
Thank you
I have a hellcrate motor with the hellcrate PCM.
I see that the hellcrate is a supported motor and requires to 2 credit to program.
My question is how do you get it to recognize the PCM if the...
At the dealer when we change the BCM we have to certify the mileage, and when we install the new BCM we get one shot to enter the mileage. Even at the dealer we can't change that value that's there
I’m going to make some adjustments to the shift speed versus TPS and lower the current a tiny bit at a time to get then shifting I’m looking for. I’m confident it’s all in the controller and it...