Search:

Hi,
I know it's been a while since this post. I recently took the car out of winter storage and I have an idea that may work here.
Gazgab, I was hoping I could get some clarification, you said...

See my previous post of how it worked out for me, I cant tell you about others. I use 2.22, removed the framework 4, installed, would not allow me to save so I run both editor and scanner on XP...

Does the Lingerfelter unit work strictly on limiting rpm's or a combination with retard?
It just occurred to me that if it was rpm only one could use a tune and just not go to the extreme retard at...

Thanks for the info gazgab, you showed a lot of detail, thanks.
I made the tune for the track only and would flash it at the track, I dont use that feature everyday. In drag racing I have to spend a...

Would be nice and I have not tried it again since installing it but back then after we installed it it would not allow me to save a file read, when I switched to XP mode the issue went away...

If you download and you still have trouble because it won't allow you to save the file you can run tell Windows 7 to run the program on XP compatibility mode. I run both scanner and editor thatway...

Good info, thanks. My launches dont take long and if I warmed up the tires I use second gear above those rpms. Does your temps go up just idling? I would think the exhaust volume is low enough during...

Tried this morning on two launches. I put -25 into a tune up to 3200 rpm, left at ~3100 and it worked pretty good hesistating for a touch then leaving pretty good. I tried a second launch at 3500...

I think what makes these details somewhat confusing when one gets into scrutinizing the fine details and peripheral factors come into play. Fluid dynamics is always at play and with it is a...

At the risk of sounding like an idiot I would think the difference in flow is related to physics then electronics.
1) You have a valve shut with pressure behind it= no fluid flow
2) then when...

Thanks a lot guys, there is a ton and 1/2 at least of great info here and quite relevant to a situation I have been dealing with. My respect and appreciation for correct injector data has grown...

I this information accurate?

http://www.ecotrons.com/Accurate_Lambda_Meter.html

Has anyone had a good or bad experiences with this unit?

They claim they are the first aftermarket using...

Not saying this is the issue necesarily but in general EFI pumps tend to screw up till they end up quitting sporadically from the fuel level being low. Electric fuel pumps need fuel to keep them cool...

I was able to find out why the WB recently would not show up during stand alone logging only but was OK with laptop open on the seat. I had set up the WB LM 1 as showing in the Gen III section how to...

Bill, thanks for the tips. I know too it's not a bad idea to clean the threads with a tap after welding too, had one bung before that ended up binding closed super tight!

Thanks and take...

Thanks for your input KFZ. Do you know if the cat up stream metal is like the regular cars or is it titanium? I had the mid section out before its not hard but not sure if I could weld on bung on...

Got the sensor in yesterday and the narrow band simulation seems to be pretty close. Made a couple of logs today with ~33% ethanol in the tank and made a VE adjustment based on the logs VE AFR error....

I don't have extended periods of time I can just devote to tuning, so I have to do it in shorter periods meaning its going to maybe take some time to get the VE MAF tuning in.

Any tips on how to...

Camaro 1,
thanks for the quick response! :cheers:

Carlos

I am trying to set up an LM1 to imitate narrow band on my 2002 Z06. The sensor has 4 wires, 2 brown, 1 light brown or tan, and a purple. The light brown shows 12 volts with the ignition key on which...

Hi Sam,
just a question but are you checking the mpg tank to tank via actual gallons used via mileage at fill up? This might sound like a basic question but I know when playing with the...

Hi Bill,
I found your thread interesting and since my 02 Z06 max torque was factory set 640 ft lb across all gears I looked at my runs from last year seeing around 277 ft lb delivered torque @...

I agree with you on the testing but checking on replacement WB sensors themselves it seems the price difference is not that much anymore so if I ever go that route I'll probably just add an LC-1 on...

Actually resolved the issue last night! After reading some threads we followed a few of the tips. Like others I had managed to load HP Tuners in a new Windows 7 laptop back a couple of months and...

Hi Flame,
thanks for the input. I was not aware that WB where being used more commonly, I thought they where used on some higher end cars. Like I said besides daily driving I wonder if a...