the engine is a 406 gen 1 SBC with the 24X conversion, GM hot cam, roller lifters and rockers(1.6)ratio, aluminum heads(64cc),headers,victor EFI intake, 92 MM throttle body, 9.75 to 1 CR
Type: Posts; User: blackbear10
the engine is a 406 gen 1 SBC with the 24X conversion, GM hot cam, roller lifters and rockers(1.6)ratio, aluminum heads(64cc),headers,victor EFI intake, 92 MM throttle body, 9.75 to 1 CR
I have been changing my tune files with no problems. I am working a a SD tune but I don't get any error codes. Any thoughts?I don't know if I attached my tune file correctly. Thanks. 119018
Thanks for the reply.
No one knows anything? I use hptuners for the vette but need a yes or no about a duramax and everyone clams up?
Can HP tuners force a regen? If so how? Thanks.
Thank you.
Do I still change the firing order in the tune or will re-pinning the coil packs take care of the firing order change? Thanks.
Thanks!
Hello, I did the 24x swap on my SBC 406. The computer came from a 2000 5.3 truck. Even though I repined the coil packs and injectors for the change in firing order do I still need to change the...
What, no one can give me a pin number or verify wire color? Thanks!
Hello, I am tring to add wide band to AC. The problem is it will not read the voltage coming from the wide band. AC pressure stays at zero. I am using pin #11 on the red c2 connector. This is my ECM...
Hello, I am trying to view cylinder misfires on my scanner. I cannot this option. What am I doing wrong? I need to get to
Misfire current cylinder #1
Misfire current cylinder #2
Misfire current...
The engine is already complete. I as just wondering if the original 5.3 tune is a good starting point or copy a tune from a 5.7 express van.
The set up is complete with 24x set up.
Just started using my scanner on a bone stock 2006 Cobalt 2.2 ecotec. The Barometric Pressure reads 19.8. Anyone know why its so low? Thanks.
It's going in a 84 vette. My issue is programming for a gen1 sb. Do you go about tuning as if it were a LS? I would think spark and knock sensors are going to be different.
New to HP Tuners. Anyone have ideas on were to start with my engine project? Thanks.
I didn't know what else to call it. Can you remove a tune from a gm ecm with it out of the vehicle? Thanks.
I have the opportunity to purchase a used VCM pro. How can I be sure it is the pro version? Thanks.