Looking for a stock 2005 LLY Topkick file dual fuel tanks, thanks.
Operating System 15231600
Engine Operation 15904640
Engine 94665132
Engine Diagnostics 93441696
Fuel...
Type: Posts; User: DPC
Looking for a stock 2005 LLY Topkick file dual fuel tanks, thanks.
Operating System 15231600
Engine Operation 15904640
Engine 94665132
Engine Diagnostics 93441696
Fuel...
Plenty of places selling trans tunes for these trucks. Are professional tuners able to raise part throttle shift points? Anyone out there with experience tuning an 2017-19 Allison??? Thanks
Are the part throttle shift tables active in the 2017-2019 T87A? Its the 6 speed allison. I've been trying to raise the shift points with no luck. Thanks
This function is NOT supported by HPT. After a few trouble tickets and beta software test nothing worked. Last response from HPT: "Unfortunately after reviewing this with our engineers it's not...
I've decided to start a new thread on this subject. Original https://forum.hptuners.com/showthread.php?82664-No-start-2018-F250-6-7-after-flash
I have a 2018 F250 6.7 and have been trying to...
Are you saying the beta version does or does not work? I am on the current full version, 4.4.2
95820
Current tune. May need to start a separate thread for this.
No luck with the spedo after making changes. Attached is the current ECM/TCM file currently in the truck. The truck spedo reads 72mph and the gps reads 76-77, wheels are 37x12.50R20. I have...
https://forum.hptuners.com/showthread.php?51676-Ford-Trans-Tuning-Tip-N-V-Base
Link for reference.
Thanks for the help! The gear ratio is actually 3:55 so I'll make the changes and give it a try.
After a littler more research it appears the speedometer function is in the TCM [TCM] 9003 - VSS Tire Revs per Distance: The number of tire revolutions per mile/kilometer. Would like to know if...
Does the spedo function in HPT work for the 18 6.7 PSD?
Spedo does not seem to be responding to tire change. Truck is about 5mph off a 72 with 37" tires.
File attached
95803
Flashed back to stock and it now starts. Initial flash I did both ECM and TCM. Second flash I did ECM started truck and them TCM started truck.
Have a 2018 F250 6.7 powerstroke that will not start after ECM and TCM full flash. The only thing changed on the file was the speed limiter and tire size. Would like some help please.
So I was able to find a .bin file for the E41ECM with mappacks. The problem is that is cost more than $3000... to rich for me. I would still need to create a .xdf file in tunerpro to use the...
I haven't done one without doing the immobilizer relearn so I don't know what the symptoms would be if I didn't. I also always do a transmission relearn procedure with my scanner when installing a...
Have you done the immobilizer learn for the ECM along with the crank angle re-learn when you put the ECM in? Also if the flash fails don't exit the program and try again, it can take two or three...
Donor truck is an L5P. Plan was to swap the engine, transmission and cluster. The fabrication/mechanical swap we can handle. If its going to be waaayyyy out of the budget we will do a 12V P-pump...
PM sent.
It must be a difficult process to pull the .bin file for an L5P E41 ECM. HPT are the only ones I know of that can tune this platform and it has to be done with a HPT modified ECM/TCM. I agree with...
GM may I just don't know where it is. Usually a few places will sell stock calibration files but I haven't been able to find anything for the L5P E41 ECM. I can't find anything newer then a 2016...
I have the ability to flash in factory updates with a pass through device using ACDelcoTDS but it doesn't give the me the option to save the file. Ford allows you to save the file or do you get it...
How do I obtain a stock L5P E41 .bin file to use with TunerPro?