Search:

correct

tuning a 2011 ctsv with twins, ive done dozens of 4 digit hp sbe ctsv2's but this may be the first one that ive had crack 1000 wheel on a 2 bar OS enhancement.


with up to 9lbs on the gate shes...

Resurrection. . .

Anyone figure it out. Same deal on my ctsv2.

Tuned tons of these cars and never seen the problem before. But I did have to do some funny scaling for my Bosch 210s
...

Maybe i did not word my question clearly. . .

I can find e67 os all day that have the ability to do the upgrade. Literally every single 2010+ e67 I've opened can do it. That does not help.
...

2009 ctsv im tuning 12632176 does not have the option to upgrade to a speed density O.S.


other compatible 2009 e67 operating systems ive checked are 12628912 ZR1 vette, and 12630465 TBSS which...

And I was connected to the Wi-Fi at the time. No prompts cam up. Everything acted like 16' or older reads.

It properly identifies both engine and trans controllers, has the normal option to read entire. It reads engine normal then reads trans in about 2sec flat and has a couple basic tables

Tuning my first t87 in a 17 zl1.

Got it unlocked and back in the car,

Downloaded beta version of software from downloads area on the site.

Download tune and license it. Don't have any TCM...

2010 camaro SS, 6L80e auto car Its been down for a while. Was a cam only car that i built and tuned for the customer over a year ago.

Now Ive done the following:
carlyle Fab 9"
Built...

Awesome thanks guys i figured it out, about the time i looked at the tune. Trans/speedo settings have an option for VSS and if you select "not fitted" it will pull from the wheel speed sensor. Thank...

Hey guys. Throwing a glide into a 5th gen im putting together for a customer. While trying to figure out a simple way to get a speedo signal i talked to rpm transmissions. They told me " no wiring...

so awebb how much do you recommend I bump the oncoming pressure presets ? 50% is clearly too much. lol

looking at that log, does anyone think it may be blowing through the converter ?

awebb, what power are you making ? these things don't really start to show their ass till you get around 600hp.

im worried something is hurt, either trans or converter because when I went back to...

tre-cool, how much do you recommend to increase the oncoming pressure presets ?

gmonde the juice is on a push button. we had it on a window switch before and had it coming off about 500rpm before the shift point, still nothing. then the box started acting up so we ripped it off....

so are the shift time tq adders the base shift time ? I thought it was time added on top of the base shift times. . . . .

oh, ok thank you for the input, that is the NA tune that was good and shifting right till we hit it with the bottle, then I hacked at all kinds of stuff, walking shift mph and rpm back with no luck,...

tried matching the 100% tps to WOT shift mph to no avail.

2010 Camaro ss, heads, cam, boltons, I had the whole tune nailed down pretty well, then I slapped a 175 shot on the car and it wont shift at wot at all. I have been walking the shift points back (...

Hopefully this weather will break soon enough. I have 5 people waiting on street tunes but the rain is killing me.

Schpenxel, well your only not far away. Lol but seriusly,thanks a ton man, I really appreciate your help.ill get that data in there. And see how it goes

SCHPENXEL, is this for histo7 ve afr error ?

without even looking at the logs, im going to say you need to fix the mechanical problem that is causing the uneven fuel trims to get a good tune in it by dialing in the ve. The power enrich is...

unless you have a nasty big overlap cam, you will likely not benefit from adjusting eoit. whats the setup ?