AFR500CAN is the best way to directly connect to MPVI3 though OBD2.
Type: Posts; User: morganf
AFR500CAN is the best way to directly connect to MPVI3 though OBD2.
Can you take a screen shot of the VCM "Log Details" Tab with each one plugged in. If one is disappearing they are either on the same CANid or using different protocols(MPVI only does one protocol at...
There is a newer AFR500CAN with integrated USB serial output for this purpose.
The yellow wire is a 0-5v analog signal that corresponds to the afr/lambda value and is in no way a digital signal that would be able to read by serial port. You maybe damaging your USB/serial device...
No, because the AFR500CAN uses the vehicles OBD2 CANbus(with OBD2 pass-though plug) it does not require the addition analog input or CANbus of Pro feature set.
Source: The designer/programmer of the...
The Transforms is the same as the AFX yes, did you should choose AFR500 V2 (WIDE) and not the AFR500? The AFR500 V2 (WIDE) is only if you have jumper 2 installed which change the standard range(9-16)...