So my brother has a 02 Cadillac ext and wants to scrap it because he keeps getting reduced engine power and a 5v reference code for the dbw throttle body. I think it's the dbw throttle body that has...
Type: Posts; User: [email protected]
So my brother has a 02 Cadillac ext and wants to scrap it because he keeps getting reduced engine power and a 5v reference code for the dbw throttle body. I think it's the dbw throttle body that has...
was it throwing the code?
Not sure what the deal is with my wideband or if something in the tune is making it richer at idle than what is being commanded. Flashed back to Express van tune and segment swapped the LS1 Engine...
0411 yeah on a sbc with an lt4 hotcam and a ramjet intake manifold. Not the best combination but its ok,
Yeah I was running a distributor and the 0411 on my sbc running an 02 express tune in sd. Just swapped over to 24x and ended up licensing a cadillac 02 6.0 tune then segment swapped from and 02...
Anybody with some tuning skills hmu I need some tuning,
Ive got some heavy fumes smoke coming from tail pipe, appears to be blue smoke but could it be from overly rich idle? My serial port aem WB is reporting 11.- 12 afr when its commanding 14. I'm...
Noticed a wobble while cranking the engine over. I was replacing my timing set while I was down there installing the reluctor, but the Cloyes set I picked up was machined wrong. Would not allow...
Runs. Thanks to those who replied. God Bless,
Can Anyone check out my tune. I got lunch money for someone through paypal .
Can some one help me out, total noob here. Pulling my hair out. Thought it was a ground issue but same thing no spark. Not sure if I flashed the correct tune either, got a little exited, could...
Figured it out. Need to redo some of my harness.
This is what I'm using.
Segment swapped the systems section on my dbw escalade tune to an 02 silverado dbc tune with same os. I think I might have a ground issue with my coil packs.
Have 12v at coils. No spark. I can smell fuel. I see rpms in the scanner. Not even a sputter. I tried reversing pins on cam and crank sensor but get no data with ls1pinout configuration but with ...
Damn I messed up. The Cadillac uses dbw and I'm running dbc. Would this keep it from starting ? Seems like I should have went with the LS1 damn . Man.
So I ended up licensing my bros 02 caddillac 6.0 tune..I removed vats and still does even fire or try to start. I pinned the cam and crank sensors according to the 99-02 schematics for LS1 f Body....
Do I go with Speed density enchanced rtt or 1 bar MAF. I think my original tune says maf but I don't use the maf its sd.
My bro picked up a 02 Caddillac Ext Awd 6.0 a while back and I have his tune, OS 12212156 . Just checked my original tune file I Licensed (xVan) and mine says 12212156 but has an arrow then says...
I used the original single coil connectors pink wire to grab 12v for the coils. While cranking it drops to like 11v which I would think is plenty.
I'm using crank sensor 12562910. Which cross...
Do I have to license a LSX tune?? Looking at starting with 02 camaro tune.
Got my 350 pieced back together. switched crank lo res to 0 and copied over dwell tables from ls1 into my tune. Using my express van tune. I have no spark and no fuel, have verified 12v and ground at...
Read a post by Fast4.7 saying he was able to run a 4x cop l31. Wya buddy? Currently still running 4x dizzy on my sbc. Have everything already for a 24x swap but I don't want to tear down the engine...
Finished the build and have been running it for a few days now. Shifts great but sometimes shifts feel soft at part throttle. Not sure about line pressure. I have been data logging a bit but not sure...