Legend.
Would love to here how you worked all this out, maybe a you tube video??
Type: Posts; User: nathanhine1977
Legend.
Would love to here how you worked all this out, maybe a you tube video??
Hi
Just looking at your post.
I am running the LSA/LS9 injectors in my E40, took me ages to try and convert the data over.
Do you mind having a look at the injector data?
Car seems to run/drive...
Thanks.
Mine is an E40, that is the issue as they are locked to 63lb hr injector table.
Can you post your tune file?
Would it be best to sell the 1500cc and look for a smaller set of injectors?
At the moment i am using the stock LSA injector 58lb's but they max out in 3dr gear at 6500.
Any suggestions for...
Hi guys, just jumping of the back of this thread.
I have an E40 ECU, and have just purchase some XSpirt 1500cc injectors, after reading some posts on scaling, it seems to me that there is a limit to...
How do you get around the hard limits on an E40, I have a set of 1500cc injectors, but as far as I can see they are just to big for the ECU???
I can't figure out our to fill all the cells when transferring E67 injector data into my E40
This is a STOCK tune file for the same car, this is where the numbers came from for the PE enable table134926
Thanks for the help.
Alot of the settings are the way I found them.
As to the VE tables I find that the way I drive is that I am either under 105kpa or maxing it out, in the boost table my...
Hi, can you upload a run file, I am interested in you PE Enable tab, it says Min MAP= 13.8psi,
Mine is set to 2.2psi134923
Hi Mate.
I have the Same ECM, E40
Just looking at your tune, I see that your injector tip temp i zeroed out, this will play with fueling in regards to water temp.
Here is my file for a...
Yes it is.
That's my own conversion done manually, as close as I reckon I'm able to do it. The conversion spreadsheet works for P01/P59 but doesn't have exactly the right labels for E40.
Does any one have the excel spreadsheet for converting the LSA injector data into E40 EMC information?121956
Are these the 0280158187 LSA injectors?
I am chasing data for the same injector, to suit E40 Gen IV ECU,
Wish I understood the data more.
Can anyone convert stock LSA injector data (GM#12598646) (Bosch# 0280158187) to be used in an E40, suit application Magnuson 1900
please do a data conversion for my E40 with these injectors GM#12598646
LSA injectors
tune file107190
https://drive.google.com/drive/folders/1vuGtykqIzaOkiEV6__xfLmmDwz4bkHa9?usp=sharing
tune file
Wow, I wish I could see where to input the Data so I didn't have to ask a silly question like this...... But
How on earth would I use this to input STD LSA injectors so I can correctly input data to...
Hi, make sure both data is in the same measurement, ie KPA/PSI
LS3 injectors are shorter than LS2 injectors.
Was there a fee to enable the Flex fuel?
Hi, is there a tried and tested procedure for the E40?
I need bigger injectors as I am maxing out my LSA injectors, I would prefer the least amount of trickery involved.
At the moment I am thinking...