Search:

2014 f-150 5.0 Is this really not supported?
Looking in the Vehicle supported, It misses the 2014. Have a customer that installed Long tube headers with high flow cats. Now setting Cat efficacy...

Still considered a new guy here. Working with a 2012 f-150 3.5, Installed CNC ported heads, Larger turbo Machined inner turbines. Just working with the tune. I seam to have the throttle opening...

93131

Did another data log, left car idling,,,,, Seen short term trims were normal,,, took a short test drive,,,,, Came back and fuel trims are at -30% short term...... Idle stays around...

i'm getting a p0507 idle higher than normal,,, That is my only code, currently,,,,,, Sometimes it does get the Rich at idle code when the fuel trims go rich on there own...... then the next time i...

this Problem didnt start from a tune change. It devolved over time. I have tried previous tune that i know run great with no change.That is why i'm suspecting a ecm going out,,, I have smoke tested...

I have a 2009 Chevy hhr 2.0 turbo. Cold the idle surges bad, Once into closed loop the idle jumps up to 1,400-1,500 rpms and wont come down. Fuel trims will be great one time, then the next time...

87410 87411 87412

ok,,,,, kinda started over,,, i listen to you and did a bunch of fixing, i didnt gain much for hp,,, but was able to get my torque to come up and stay...

87256

Here is the current tune. I feel i'm struggling with learning this for torque based tuning.

87188 Updated dyno pull, with your config of things to log. , dam knocks are coming in.

well We do want to make more power, But no focus on boost, If boost wants to come up, Then great, But main goal is a 92 octane tune

87182

2012 f-150,, Could use some pointers on things i should be logging while on the dyno, Just a almost stock truck, Just a bigger intercooler. Stock turbos, Not looking to raise the boost, I...

Well thanks for the info, That was easy.

Looking to install a 3 bar map sensor to this 2012 f-150, I'm not seeing were to modify to allow for the new sensor. I'm still a little new to Hp tuners. Any help would be nice. The truck has stock...