Can you give me an example of some values I can use here? I dont mind the shift being hard at full throttle but would like it to be smooth at partial if possible. Thanks for the help on this!...
Type: Posts; User: MrXerox
Can you give me an example of some values I can use here? I dont mind the shift being hard at full throttle but would like it to be smooth at partial if possible. Thanks for the help on this!...
Hey gang, got a quick question. Traded my stock 60e tranny in my 03 Silverado with a built one from Mad Dog transmissions. I have removed all tq mgmt and am happy with everything except for the 1-2...
Hey gang, have a question. I have a friend that owns a tire and wheel shop that has put a lift kit on a couple 2007 Chevy avalanche's and the service suspension, traction control light and air...
Hey gang, have a question. I have a friend that owns a tire and wheel shop that has put a lift kit on a couple 2007 Chevy avalanche's and the service suspension, traction control light and air...
Buy an LM-1 extension cable from innovate and then find some to send you a dead LC-1 o2 sensor and cut the pigtail off of it and splice it into the round end of the LM-1 extension cable after you cut...
Sorry for the late reply guys, yes I meant the pigtail from a dead lc-1 o2 sensor. I ended up getting one from a guy for the cost of shipping... Thanks for the replies!
Sean.
Why not just get a cig lighter adapter from Radio shack and grab your +12v and Heater Ground from there? Or, get you an old bad 02 sensor and cut the connector off of it and use its +12 and Heater...
I am attempting to create a portable wideband unit out of my LC-1 & XD-1 guage in a project box similar to the one I have seen SoundEngineer do. I have everything I need except the male connector on...
Do the values need to be changed on the Bank 2 tables as well in the 02 Rich/Lean vs. Airflow Table?