Search:

Type: Posts; User: Takid455

Search: Search took 0.00 seconds.

  1. Replies
    0
    Views
    4

    LS3 w/ GMPP E67 ecu wont read

    LS3 w/ GMPP E67 ecu wont read
    Get 36x failed message
    Can record vitals with the scanner but the editor can't read it. Being a GM piece, there is no VIN. Are the over the counter GM ecus encrypted?...
  2. wiring for 0411 ecu and viper (3 wire) vss

    Have an 0411 ECU and a Viper 3 wire vss (power, ground & signal). GM VSS is only a 2 wire (High and low, sine wave). How ,if possible can this be wired so the ECU gets the proper signal? Thinking...
  3. Intent is to watch or find out if the sensors are...

    Intent is to watch or find out if the sensors are adjusted / properly in relation to the reluctors. Non LS application but using LS electronics. Sensor holders have adjustments to dial in their...
  4. Can't the ECU see the high and low signals ? It...

    Can't the ECU see the high and low signals ? It obiously does something with signals thus the program should be able to see what they are. Beleive the software can read the injector and coil pulses...
  5. Way to watch cam and crank signal in MVPI2?

    I want to watch the wave patterns of both the cam & crank sensors. Want to overlay them / view at the same time. Not seeing the options to do such in the scanner.
Results 1 to 5 of 5