Why hellcat injectors for this? With this setup you will definetly never run out of fuel with stock injectors
Type: Posts; User: monty007
Why hellcat injectors for this? With this setup you will definetly never run out of fuel with stock injectors
Anything coming for these?
Does it need an unlock?
He was talking about Dodge Ram, not Challenger Scat Pack. Completely different story and and yes, with a good tune you can gain 30 hp and sometimes more on these. Seen it many times.
Even if not required, i would put it into the car one time and start it just to know the PCM is working.
Otherwise you start searching if there is some issue. This way you can eliminate a "bad pcm"...
---
What WOT AFR do you guys consider best on the DI engines? N/a and supercharged.
Hearing some experiences would be great.
Are you serious? Man you better dont touch this if you consider AFR 12 too rich for a supercharged car.
Your VIN says you have a 3.55 rear axle ratio
Let them disable it and learn themself. It was told 100 times and they dont believe that disabling is the wrong way with the given options to tune.
There are lots of people installing these and not tuning anything and they dont throw a code.
Realeran the TB first, in WiTech under PCM - Misc - Relearn ETC . There is a reason why this function...
Have you tried to do a TB relearn with WiTech? That sometimes fixes it already. But i have seen many of thes TBs having issues / not working correct. Even out of the box i have seen them broken...
Customer is using a handheld from another company together with their unlocked pcm.
Will HP Tuners be able to work with that PCM?
Car is running all ok, just want to go another route :D
Tried to...
This will disable the rear O2 sensors make you never get readiness set. This method was used before the errorcodes were available for programming
Will that be only good for the dyno or can it stay like that for normal driving as well?
Like Brice said the 300C 5.7 usually make that kickdown in manual mode. From what i see many Charger 5.7 (Daytona) do not do that.
I would love to see a solution for that also
SRT8 dont do it, but a lot of 5.7s do that
This engine has no MDS. Its scary to see how many people are messing around with engines and not doing their homework before...
This car has no maf sensor
File is read, recognized, can be edited but no way to license or to write.
Have emailed support yesterday, but no reaction. Any solution?
Sorry, did not see that. Maybe an autoresponder on the support email adress next time as well ;-)
2014 Challenger file sent to support several times since 1 week ago, still not supported, no reply at all :(
Is this only important for your testing or does it mean cars tuned with another device before can not be tuned then?
Is there a locking function for the Dodge pcm?
Works on all, just had a 2013 5.7 on the dyno today