I would suggest to turn it OFF only if you have removed the cats too. You can check out the max. temp specs (RTFM) of the stock sensors and cats and rise the thereshold a bit torwards the specific...
Type: Posts; User: nonnex
I would suggest to turn it OFF only if you have removed the cats too. You can check out the max. temp specs (RTFM) of the stock sensors and cats and rise the thereshold a bit torwards the specific...
Hm, silly question, but have you adjusted the period-rows/scale to be logged for the '19 in your Scanner-Tool too? Maybe they are mismatching.
read your post with much interest. Asked myself why the values has to be divided by 2. Maybe because the delay total PID delivers the sum of both sensors? Could be an explanation.
Anyway. Have...
Have you (or the workshop) done a crank relearn? Just asking because of your "lightened flywheel" and some ppl. do forget to do it afterwards.
Using Compare Log in the Beta (4.5.97.0) throws an exeption, but worked in the previous beta
Environment
Win10 - .Net 4.8 REL1
Installed VCM Release 4.2.2
Installed VCM (Beta) 4.5.97.0
...
Hi Folks,
recently I have installed my LT Headers (wrapped) and made some minor adjustments as best as I can because I'm new to this and have not as much exp. as many of you guys.
I try to...
Of course you are right, I have confused the numbers. Yup, the higher the number the steeper the slope.
But given your response this has'nt helped with the WOT delay. Wonder what it might be and how...
Hm, just read infos about "enrichment rate".
Maybe lowering the number will reduce delay too and will speed up the enrichment rate process, going from Stoich to Power Enrichment should be quicker...
Thank you. I have pp2 and pp3 already. I was just interested in the pp1 because I havent found one either and of course to complete the tripple in my collection.
How ever, would be interesting to...
I'm always interested in learning stuff by examples and the FRPPs are a good Source. Just wondering what they did on the M-9603-M8 PP1.
Would love to have a look on it. Because its a Stock parts...
Best would be to load both into the Editor and do a compare|diff., copy over the things that has been obviously castrated for the EU.
Had very good results by doing so. Car and pedal response...
oh ok, good to know. Have'nt ever tried to upload an tune (based on a US dump) directly on an EU Stang, therfore didn't noticed.
Thanks for the info. But the processors are the same I guess.
Have an EU Spec ('15) and I'm using Hp-tuners without any problems.
By the way: There are some differences in the stock calibrations between US and EU. Mainly because of noise and|or other...
Sensor Configuration (also Voltages) are available in Beta.
Yeah! You guys are the greatest. Thank you very very much.
Reminder: Not confirmed. Following values taken from the Lund '18 Manifold install documentation.
'18er Sensors are sending 3.39 V...
Hello HPtuners,
Hello Community,
is it (or will it be) possible to edit the expected signal voltage from CMCV Control Sensors [open|close] (aka IMRC, aka Runner Control Sensors)?
It's about a...