Search:

i am having trouble logging TPS voltage on an 02 3.8 firebird, this is a DBW throttle assembly.

its the second Fbody that i have run in to this problem.
None of my configs are getting it to work....

any luck with these yet?

fixed it for ya.
fbodys left and right bank

wow..not many run that much boost. sorry for your grief.

i'd be interested in seeing a scan with that much boost if u have one..
more out of curiousity than anything.

wow!
bummer bro.
curious...how much boost?

good call Russ.
using my other wb's the write up worked flawlessly.
trimmed out to zeros and 1's.
thanks a bunch.

car never left idle areas, parked in the garage for the testing/tweaking.

i'll try it again with my LM1's, when it cools down some, i know thier dead on.
thanks guys.

anybody wanna buy a...

hi Russ.
i've been struggling with lean idle. (15.7-16.5afr)
this morning i used your write up and had it dialed perfectly.
commanded 14.7, netted 14.7 with b1s1 unplugged etc after 3 adjustments....

understood, many have used the lt1 or the vette/truck parts. but we have an internal "scale" (physical limit for the lack of a better term) limit of 11500 which makes it tough to dial in the upper...

thanks bill,

i wasnt clear if this was necessary since some friends and even EC_tune mentioned its plug and play accurate.
sigh, bck to the garage in flipping 100+* weather and 990% humidity..dbl...

the v6's are limited to 11500hz internally, no way around that while still using a maf referenced tune.
EDIT: some cars have issues with exceeding that 11500hz limit and the puter freaks out, shuts...

update.

just got a response from DynoJet.
but need somebody from HPT to verify this please.



so now i/we need to know is the premade/default DJ commander wb PID accurate. (,625 = +10)
...

kewl. thats what i needed to know..(analog gauge)
thanks a bunch.

thanks for the response

how close is your DJ gauge to the hptuners built in PID.

dedicated LM1 user here (own 2 of them),
playing with the DJ system.
questions:
(EIO user)
is the preset DJ PID accurate? or is there an offset needed...???

next, is the gauge that comes with...

quick question gang.
the serial EIO cable only has 1 ground (pin 5) for the 0-5v inputs/outputs etc.
is it ok to add more than one item(s) to this single ground?
sharing it?
dual wb, egt, 3bar,...

agreed.
good post mike.

bump..

chris?
bill?
clarification? confirmation?
thanks

take this for what its worth.

toss the PT. (i gave one away)
yeah, its that bad in comparison to hpt.
your trying to absorb out dated technique and the support that it had at one point in time...

agreed.
good post greg.

thanks mike.

your comments are not appreciated.
there's no need for you to be posting in this thread if u do not have relevant answer to the question.
so feel free to excuse yourself from this one.
its...

just looking for info on the table itself.
how its referenced for time beyond the 25 sec.

the table stops at 25.2 seconds.

beyond this time frame/limit is the last row of 25.2sec used for an indefinate time frame?
say 1min, 10min, 3hrs or what ever.



thanks.

any update for this being added:



per this thread:
http://www.hptuners.com/forum/showthread.php?t=15778

thanks guys.