Search:

Type: Posts; User: Ludlow

Search: Search took 0.00 seconds.

  1. what do you suggest i do? i attached my log in...

    what do you suggest i do? i attached my log in the post, do you see anything strange? i checked the airflow final minimum as edcmat suggested. but it seemed pretty smooth.
  2. Thank you!!

    Thank you!!
  3. Im new to tuning and hp tuners, i checked every...

    Im new to tuning and hp tuners, i checked every chart under airflow, but i didnt find anything to do with rpms.

    Would you be able to guide me in the right direction?
  4. rpm drop lower than idle after throttle release

    hello everyone.

    i have noticed that while in park if i rev engine normally(1500-2200rpm) then let off the throttle, when the rpms come back down they drop to about 500-600, the engine will...
  5. update: rocker tightened up, pushrod was nice and...

    update: rocker tightened up, pushrod was nice and straight as well. engine light is gone, idle is much smoother. i did another log and i notice now i have misfires in all cylinders up to 20 or so at...
  6. 140685140686 got the cover off and found the...

    140685140686

    got the cover off and found the intake rocker for cylinder 7 had been pushed off the pushrod. is there a way to know if the lifter is the problem without removing the head/valley...
  7. update: did compression test on bank 1, and half...

    update: did compression test on bank 1, and half of bank 2 ( battery died) cylinders 1,2,3,4,5 all have 175 psi, cylinder 7 had only 12 psi. cylinders 6 and 8 are unkown for now, but either way, i...
  8. oh okay that makes sense. I will do a compression...

    oh okay that makes sense. I will do a compression test to find out whats going on .

    and for the cracked plug, i bought a new plug and installed it(12-13 lbs torqued), same misfires. (in cylinder...
  9. if there would be anything wrong with the valve...

    if there would be anything wrong with the valve train, or compresion, would that only cause problems at idle/cruising? the misfires go away and engine light goes away as well when giving throttle....
  10. the plugs and wires are brand new. i had them all...

    the plugs and wires are brand new. i had them all pop when full plugged in. could it be a problem with the driver side(bank1) part of my fuel rail?
  11. okay thank you for pointing that out!

    okay thank you for pointing that out!
  12. serious misfire cylinder 7 , medium/mild misfires other cylinders

    Hello forum! I am seeking help with my Truck, my theory is I have a problem with idle AFR, but i am no where near sure.
    I will try to give as much information as possible to be of the most help....
  13. will do , thank you

    will do , thank you
  14. since i had it bench tuned by pros, you think...

    since i had it bench tuned by pros,
    you think they gave me a shit tune,
    or would the fact its rich in a ton of spots indicate something like fuel injector stuck open?
  15. trying to correct tune. freeway cruising makes backfire/misfire popping sound

    hello everyone.

    i am looking for guidance with my tune. specifically trying to correct a flashing engine light, not sure if it is a misfire, or backfire but while cruising on freeway, it makes a...
Results 1 to 15 of 15