Yes I did. The link I posted on 2/12 has the answer (at least that?s what worked for me)
Type: Posts; User: s30.hybrid
Yes I did. The link I posted on 2/12 has the answer (at least that?s what worked for me)
Try a new cable or different USB port on the computer. Are you getting lights on the MPVI2?
Here?s a tip that helped me... I was also having trouble with the initial pairing of my MPVI2 and a new Windows 10 laptop. I think my problem was that I had the unit connected to the laptop via USB...
Glad to hear you got #8 figured out. On #6, if you?re sure the power and signal wires are good from the PCM to the connector then I would focus on the terminals and pins in the injector connector and...
My guess is whoever owned the engine before did a flex fuel conversion. Pretty common for those looking to squeeze a little more power from the engine. Also common to have additional supporting mods....
Since you already ruled out the PCM drivers, then this is the next step I would do in troubleshooting (actually, it would?ve been the first step but...) while you?re swapping the injectors take a...
In my experience most junk yards will cut the engine harness just to pull the engine quickly. That means the PCMs are often still in the car with the connectors attached. These make a great start to...
I would dig into whatever laptop or computer (not PCM) you were using at the time of the crashing. Were all other programs shut down or was there a large computing demand at the time? Plenty of...
Hey thank you for the reply. I did a bunch more searching and came across this old thread from 2005:
...
I seem to be having issues connecting to Gen 3 PCMs with an MPVI2. I have been able to read and log other PCMs so the MPVI2 does seem to work. So far all the Gen 3 PCMs have been via a bench harness...
Thanks for the reply. Since I was unable to find more info I ended up going with a laptop and it?s been working great. Glad I passed on the GO but had I known I probably would have bought the Surface...
Did you ever find a fix? I?m having similar issues too with an MPVI2 and P59 PCMs.
Ok, realize this thread is a few years old but.. is the VCM suite fully functional with the newest Surgace Go with Windows 10s? Looks like a convenient option if it?ll work. Wanting to confirm before...
Sorry for my newbness, but I have been looking around for a new laptop to run hptuners and came across a Microsoft surface running windows 10s. It looks like it would meet the requirements, but just...