Search:

Type: Posts; User: Onomoto

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. hey team. i have had the blue cat tool for a...

    hey team. i have had the blue cat tool for a while but only see options for rwd trans and not for a 4t65e. can you share with me how you did it?
  2. I like the exhaust sound the chargers have between upshifts. Can i tune for that?

    I had a 2018 5.7 charger with the active exhaust. I love the way it sounded when on a w.o.t pull in between shifts that( brap ) sound it makes. I would guess dodge uses the torque management to pull...
  3. I like the exhaust sound the the 5,7 charger has between shifts. can i tune for that?

    I had a 2018 5.7 charger with the active exhaust. I love the way it sounded when on a w.o.t pull in between shifts that( brap ) sound it makes. i would guess dodge uses the torque management to pull...
  4. Replies
    6
    Views
    1,236

    have tried several different things still no...

    have tried several different things still no luck. started a support ticket said they would pass it along to a engineer but never heard anything back
  5. First maf re curve on gen 4 with random kr.

    Truck has a cold air with a k&n and a cat back. I needed experience with a gen 4 so i had a look see. after i re curved the maf I tried to give him a few degs of spark truck always runs 89 octane...
  6. Any updates on this?

    Any updates on this?
  7. Replies
    6
    Views
    1,236

    maybe. i will try in a bit

    maybe. i will try in a bit
  8. Replies
    6
    Views
    1,236

    Have tried 100, 150, 180.

    Have tried 100, 150, 180.
  9. I was able to do this same thing to my...

    I was able to do this same thing to my supercharged Monte carlo. I just scanned the car to see how much manifold kpa it made at idle. Did a little driving and took note how much kpa the car had...
  10. Replies
    6
    Views
    1,236

    Vcm will not turn fans on after key off

    2001 monte. Cc override is disabled temps are set to 100 degrees and to run for 120 seconds after key off. Fans work under normal operations and can also turn them on and off with the scanner. I...
  11. Replies
    9
    Views
    2,148

    Put the old vcm tuned for boost into na car with...

    Put the old vcm tuned for boost into na car with na bcm. Performed security relearn. Fired right up been driving it for 6 months
  12. Replies
    8
    Views
    1,018

    Had the injectors flow tested and cleaned....

    Had the injectors flow tested and cleaned. Replaced plugs and 02 sensor. Runs like a champ now
  13. Replies
    8
    Views
    1,018

    I have a concern about how the rpms spike up with...

    I have a concern about how the rpms spike up with no throttle input.
  14. Replies
    8
    Views
    1,018

    5fpd. That might be true but I have never seen it...

    5fpd. That might be true but I have never seen it before on past log files. Plus the way the rpms shoot up on the log is questionable because when it does that the engine mis,s. Along with other...
  15. Replies
    8
    Views
    1,018

    Noticed the 02 sensor is staying rich a lot. Then...

    Noticed the 02 sensor is staying rich a lot. Then the open loop follows.
  16. Replies
    8
    Views
    1,018

    took a longer log file. most of the time it was...

    took a longer log file. most of the time it was idling out of gear. i noticed that the ecm is commanding 15.7 afr and going into open and closed loop.
  17. Replies
    8
    Views
    1,018

    is my ecm taking a crap?

    So short and sweet i had a couple of issues this past week. Found a faulty maf that was giving me grief along with a bad coil pack.
    But i cant figure out why its doing what is is now. It started...
  18. Replies
    9
    Views
    2,148

    Will the vin need to be changed in the with the...

    Will the vin need to be changed in the with the old pcm to talk to the new bcm?
  19. Replies
    9
    Views
    2,148

    I am very willing to put my old ecu into the new...

    I am very willing to put my old ecu into the new car. I believe i have the vats already disabled. Is the vats the only road block between being able to use my old ecu into the my new car? I have read...
  20. Replies
    8
    Views
    1,155

    So i have been plucking away and cant tell if i...

    So i have been plucking away and cant tell if i have made any real progress other than i dont get nearly as much tip in kr. In the snap shot you and see that i still get the damn knock. I remind you...
  21. Replies
    9
    Views
    2,148

    Ok so my next question is would i have to do a...

    Ok so my next question is would i have to do a write entire to the na 3800? Or just load in my l67 tune file? I dont know if the original tuner had use a different o.s or anything else because the...
  22. Replies
    9
    Views
    2,148

    Vcm swap into same model car.

    I have a 01 monte carlo with a e85 l67 swap that had a 3800. Been driving on the swap for the last 2 years no problems. I need to retire that car because of living in the rust belt. I am pulling the...
  23. Replies
    8
    Views
    1,155

    For the time being crap 87 octane. I wouldn't...

    For the time being crap 87 octane. I wouldn't think that the very minimal throttle pedal movement would effect the kr like it does but I guess that's why they call it learning.
  24. Replies
    8
    Views
    1,155

    I did remember reading up on how to disable per...

    I did remember reading up on how to disable per how you stated. What was confusing was reading the description in the software on how to remove it.
  25. Replies
    8
    Views
    1,155

    Ahhhhhh. I was waiting for you to chime in 5FDP.....

    Ahhhhhh. I was waiting for you to chime in 5FDP.. Thank you sir.
Results 1 to 25 of 66
Page 1 of 3 1 2 3