Search:

Type: Posts; User: allpargarage

Search: Search took 0.00 seconds.

  1. Replies
    15
    Views
    492

    Well we have Witech access to handle things like...

    Well we have Witech access to handle things like that. If the PCM is 2015+, we have HP write new VIN during unlock process.
  2. Exactly. The TCM uses the wheel speed sensors as...

    Exactly. The TCM uses the wheel speed sensors as the transmission output speed. If the gear ratio is not updated, then the gear change will not play nice with the TCM. Change gear ratio in Scanner.
  3. Replies
    15
    Views
    492

    Just need to set table 13512 to 5.7 so ABS/ESP...

    Just need to set table 13512 to 5.7 so ABS/ESP will be happy. If you leave as 6.4, ABS/ESP light stays on with DTC's for configuration mismatch and will disable.

    Big thanks to Hemituna!
  4. Replies
    15
    Views
    492

    Absolutely. We have done plenty of 6.4 swaps and...

    Absolutely. We have done plenty of 6.4 swaps and when engine comes with harness & PCM, we use it. Send 6.4 PCM for unlock and have them write new VIN.
  5. Replies
    31
    Views
    925

    Hey Homer, Here is read from 2016 Charger R/T...

    Hey Homer,

    Here is read from 2016 Charger R/T that had Scat Pack Stage 3 kit installed. You'll see cam tables are the same as stock.93827
  6. Replies
    31
    Views
    925

    5.7 PCM will show full advanced at 125. Like...

    5.7 PCM will show full advanced at 125. Like Hemituna stated, treat 125 as 134 and work down from that.
  7. Replies
    10
    Views
    294

    What wideband are you using?

    What wideband are you using?
  8. Replies
    23
    Views
    981

    Post your tune

    Post your tune
  9. You shouldn't have to disable any airflow codes,...

    You shouldn't have to disable any airflow codes, just fix the tune. You are probably setting DTC for P2173/P2175. Make sure all your Adap tables are adjusted.
  10. Yes. You can make an easy Excel sheet to make a...

    Yes. You can make an easy Excel sheet to make a copy and paste table. Multiply OSS value by gear ratio to find commanded shift point. If you have a desired shift point in mind, simply divide by gear...
  11. Replies
    4
    Views
    391

    I have the PCM file for Redeye, but did not get...

    I have the PCM file for Redeye, but did not get the TCM file with it.
  12. Replies
    15
    Views
    741

    What is your current timing table looking like?...

    What is your current timing table looking like? What are your AFRs at? Posting your tune and logs will help other professionals here guide you in a good direction.

    Trans tune will definitely help...
  13. Replies
    23
    Views
    981

    Try setting to zero and see how it idles. I...

    Try setting to zero and see how it idles.

    I typically try not to mess with Idle Torque Spark Tables unless I have too. I'll bring base spark up in the first columns up enough just to stabilize...
  14. Replies
    23
    Views
    981

    Did you happen to bump up timing in your Minimum...

    Did you happen to bump up timing in your Minimum Spark Base tables? If you are following the Tuning Guide, then you probably set first few columns to 5. Increasing timing will smoothen out idle. Set...
  15. Thanks so much! Very valuable information and...

    Thanks so much! Very valuable information and grateful you were kind enough to share.
  16. Hey there! Is it possible for me to have injector...

    Hey there! Is it possible for me to have injector data emailed as well? I have installed a set into a 6.4 as well and have it running pretty well, but am missing offset data. I would really...
  17. Did you ever resolve this issue? I am having the...

    Did you ever resolve this issue? I am having the same thing happening on a 2014 6.4 WK2. Submitted support ticket but having difficulty there as well.
  18. Replies
    1
    Views
    209

    They have it available for download on their...

    They have it available for download on their website...
    http://fuelinjectorclinic.com/Dodge1000
  19. Replies
    2
    Views
    332

    Yes. 2015+ requires unlock modification. ...

    Yes. 2015+ requires unlock modification.

    https://www.hptuners.com/product/pcm-modification-service/
Results 1 to 19 of 19