What do you think of these results?
Type: Posts; User: kprog
What do you think of these results?
This is my test. I lost some time on the way out. It is on a street road, using the launch control.
I know that you can make better starts without traction controls, having good touch..
But I was...
I know... I know you did a good job!
I bought a Dragy. I will send you the time records.
It confirms that the problem was with the Dyno.
I don't set the rotating mass of my car because it doesn't know how many kilos it is.
Does anyone know the weight of the rotating mass?
According to what he says, a 40 to 100 of less than 6 seconds is great for a stock C7... which would only be achieved on its best days.??
Mine always does 5.6 to 5.7
another indication that it does...
Yes, I also think that the bank is the problem. He didn't do any configuration. He said it wasn't necessary...
Also, I have a friend with a grand sport. 2017. manual transmission. and when we race,...
Thank you if I saw this value. I think the traction control acted in 2nd gear.
I was referring to later in the log. I accelerate in 5th gear all the time. simulating the launch on the dyno.
I see...
I am not able to see the value of 480 torque calculated in the log.
where does it say that value?
And what do you think of the log?
ok I'll send you a log.
Registered 40 to 100 mph today + simulates the launch of the Dyno in 5?..
It seems that I see everything well.
A doubt. Is the torque indicated by the log real? I mean,...
repeart
I have done the typical test from 40 to 100 MPH.
first in one direction of the road and then just in the opposite direction.
I always get values between 5.6 and 5.7 sec.
It seems like a good time....
Hello, I have a C7 z51.
With exhaust downpipe and X pipe. both without catalyst.
KN replacement filter
And a Tune.
The truth is that the car works very well.
I have done several tests against a...
I still don't know of anyone who can solve this.
All cars can do it well, they decelerate by making explosions and fire... and they don't have engine retention problems... I don't know why it's so...
ok add file..
hello. Can someone solve these 2 problems for me?
1. I make Burbles.. OK. I modify the 2 tables in Minimum Spark. Base and Long Temp. Very little. only the first 3 lines and only from 4,000 to...
It seems like everyone is very busy on this forum.
It seems incredible to me that no one answers such simple questions for experienced users.
hello!
Can you clarify any doubt for me?
in the log of my C7 Z51..
The value of the Log called..
Air-Fuel ratio... is it a real and reliable value? (I don't have wideband)
and the Knock...
by the way. I have tried the technique of copying part of the virtual torque map. from the lowest map to the highest, and so on in all of them. This is supposed to solve the problem. but it hasn't...
and another topic... To make pops and bang?
(explosions when decelerating)
I have modified minimum spark. base and long term. the first 4 lines at -15 at maximum rpm and decreasing.
With this I...
understood! thanks guys. The transmission adjustments are difficult to make, is there a tutorial or explanation of what I have to adjust?
understood! thanks guys. The transmission adjustments are difficult to make, is there a tutorial or explanation of what I have to adjust?
:( any help with this?
gearbox 8AT
Hello.! I have a C7 Z51 from 2015. It has a downpipe (no cat). Xpipe (not cat). and KN replacement filter.
I use 98 Octane unleaded gasoline.
In Spain it is the best there is, I think it is...
HII
I have a question.
Sorry for the English, I'm from Spain!
I see that the in P and N only goes up to 4,000 RPM. I know I can modify it.
Is it so dangerous to increase the RPM on this engine?...