Search:

Type: Posts; User: CatnipG5Bandit

Page 1 of 12 1 2 3 4

Search: Search took 0.00 seconds.

  1. Yes, typically adding to the LSPI lets the engine...

    Yes, typically adding to the LSPI lets the engine experience higher loads. It got my FMEM to go away that's all I know. To my knowledge the vehicle doesn't use driver demand tables. Maybe changing...
  2. It may not be really necessary, but with the...

    It may not be really necessary, but with the recent 110* temps I'd rather play it safe. I'm at 4000ft elevation and routinely go to 9000ft in this car. if I recall correctly turbo FMEM was fixed by...
  3. I switched back to e30 today and tweaked the tune...

    I switched back to e30 today and tweaked the tune a bit. I was able to hit 20psi of actual boost and a max of 15.5lbs of airflow. It averaged around 10-12* of timing at WOT so I'm pretty happy with...
  4. Yep, MAP is what I'm reading. This 235kpa was on...

    Yep, MAP is what I'm reading. This 235kpa was on e30 so I felt a little more comfortable cranking it up. The other things I've messed with on e30 are: Increase the "airflow limit" under the...
  5. Are you in the US? Did you use HPT for that? I've...

    Are you in the US? Did you use HPT for that? I've only been able to reach 235kpa max and I would like to know what to change to increase that.
  6. I suppose so. Note this is a 3 changes from a...

    I suppose so. Note this is a 3 changes from a stock tune(+15% airflow limit, PE fueling, gear shift hang), not my previously tinkered-with tune. I'll see how high I can get it. Safely, that is.
  7. I realize it's been almost 2 years but I've...

    I realize it's been almost 2 years but I've picked up tuning again and the scanner has been fixed for a lot of my problems. I tried selling the car, but anyone who has been interested can't drive...
  8. I threw a tune on the fiesta today and logged it...

    I threw a tune on the fiesta today and logged it on e30. I very slightly changed the stoich value and added timing, then set WOT enrichment to .89 lambda. I am hitting 10-11* of timing in second and...
  9. I believe mine I waited until 1.3ish or more load...

    I believe mine I waited until 1.3ish or more load and 4000rpm to be safe. It hits 1.3 pretty quickly. It gets fiestier with time so I'm going to assume it was a knock thing for now
  10. Iirc it say borderline most times. The knock pids...

    Iirc it say borderline most times. The knock pids do not work for my engine. I have already put in a request for airflow and a couple others that don't work months ago and had no response yet....
  11. Those are the tables I nodded and didn't see any...

    Those are the tables I nodded and didn't see any increase in timing so I set it stock again. Perhaps it was seeing knock and pulling timing. I'll try that again and surely it won't knock on E30....
  12. Metroplex if you're still following this thread,...

    Metroplex if you're still following this thread, any advice on increasing timing? I changed the tables that made sense but timing remains the same. Should I just increase every table that has timing...
  13. Replies
    24
    Views
    12,455

    Basically log anything that says "_____________...

    Basically log anything that says "_____________ source." Those are the things limiting the engine. Then slowly raise each of those things in the tune.
  14. Replies
    24
    Views
    12,455

    I'm also awaiting even an email back about not...

    I'm also awaiting even an email back about not being able to read airflow in the scanner for my 1.0L. Patience is a virtue. I'm sure they're super busy after adding so many vehicles to the supported...
  15. Replies
    24
    Views
    12,455

    Email support now. I have something that hasn't...

    Email support now. I have something that hasn't been responded to for at least a week. Maybe two?
  16. Replies
    24
    Views
    12,455

    I had this problem because my software wasn't up...

    I had this problem because my software wasn't up to date. I had to download the then beta 3.6, which should now be 4.0? If not email support. They're a little backed up at the moment but they'll need...
  17. Finally logged and sent an example to support. ...

    Finally logged and sent an example to support.

    0-60 is still 8 seconds at 113* iat2 but now with wheel spin included.
  18. hell yeah. Get that tune. I'll help if you need...

    hell yeah. Get that tune. I'll help if you need it and if I'm able.

    Update: Got my turbo hard pipe today and wow. BIG difference. At 4000ft and 90* ambient temps it can roast the tires. Butt dyno...
  19. My issue is that I want to get the catted...

    My issue is that I want to get the catted downpipe since I live so close to Texas and if I ever wanted to sell the car it'd need to pass emission tests. One day when I'm rich I'll buy all the stuff...
  20. Murph what parts do you have for it? I have only...

    Murph what parts do you have for it? I have only bought the turbo hardpipe and secondary induction tube so far. I haven't received the hard pipe but even with just the secondary tube installed and it...
  21. Thanks. Will do as soon as I get back to my...

    Thanks. Will do as soon as I get back to my laptop.

    Update! I received my upgraded Forge secondary intake tube today(AAAAALLLLLLLLL the way from the UK) and installed in 10 minutes. It increase...
  22. I'm not sure. Anything to do with mass air flow...

    I'm not sure. Anything to do with mass air flow or desired airmass displays either 0 or several million units. I don't know if this is for the 1.0 only or if I need to log something counterintuitive
  23. Noted. Thank you. I ordered a de-resonator...

    Noted. Thank you. I ordered a de-resonator secondary induction pipe and a turbo hardpipe upgrade, but had a tire blow up on the freeway so the other goodies will have to wait. I get funny looks from...
  24. Got a new laptop battery today and logged a 0-60...

    Got a new laptop battery today and logged a 0-60 of 8 seconds flat. Not bad for 4000ft elevation I suppose. Also took it to 110mph or so. I started hitting insufficient fuel again but it was...
  25. I actually don't have access to the trans trunc...

    I actually don't have access to the trans trunc tables. My car is a manual so maybe that's why? I was still hitting a trans trunc limit.
Results 1 to 25 of 298
Page 1 of 12 1 2 3 4