Search:

Here is a 2017 Roush "727" Auto file I just recently pulled if that helps.

THis has been a problem within the V6 DI motors also... I've done quite a few of them and without all the TQ coefficient tables the C7 seems to be the same way and the Silvy...

We have our R&D C7 now so we've been poking around pretty much during today. It is very like the V6 DI stuff, so if you have experience with them this should be pretty similar. We are still missing...

Ok so this was actually a 2006 Corvette with a 6L80E that we just swapped in a TR6060 transmission to. We used a manual engine harness, manual transmission harness, flashed ECU to a manual file/VIN...

Hey guys, done the fast learn a bunch of times on the 6l80 ECU's with great success (With and without stalls). Have a 2012 Camaro SS now, 3200 stall in it. When I am within the 70-95* range it will...

Yes... I'm in Panama City tuning right now but once I get back home I'llpost my files up...

Thanks Chris, Bill pointed those out to me while I was out there in Houston and got it squared away!

Been racking my brain on this one... There are no commanded torque tables besides some of the BTM tables. There is a Peak Torque table that it would seem ALMOST correlates with the throttle closing,...

Woh.. do NOT remove one of the front narrowband sensors in favor of the Wideband. You need BOTH front narrowband sensors for fuel calculations for the vehicle. The best thing would be go to an...

These new options are great! Tried them out on a 11 SS A6 with built trans and a 10 GS A6 stock trans, yesterday at the track and on the road. Working out great. The clutch air purge got rid of that...

This is great to hear.. Been waiting for these minor additions. I'll say though that HPT has the most available A6 parameters. I work with a few other tuning softwares daily and I rely on my HPT for...

Just a quick heads up.. They are a drilled out factory LS3 injector... Definitely something that I would prefer to stay away from.

Any new beta versions for adjusting these values for aftermarket/big boost ?

I guess halfing the MAF tables/load tables would work also, but just seeing if there is a new beta around...

- Matt

I am running the latest HPT beta software. We have been with another tuning company for the Fords, but am going to switch over solely to HPT. Of course I go to do my first twin GT pump car with HPT...

I'm thinking at this point, possibly bad COPs? They are Granatelli and I have stayed far away from their stuff for a while... The wrench light happens as soon as you start making positive pressure...

MAF was a POS, seems to be problem solved!

Agreed.. any direct link to purchase credits have a vehicle sitting here strapped to dyno ???

Running into a really weird issue here.

2002 Corvette
Kenne Bell 2.8L
Siemens 83lb H/I injector set

Once the car actually turns over and runs, it runs great and will continue to run for as...

Ya VE mode is disabled, I do this as common practice on the new combos.

firehawk: Ya I know of the ETC area scalar. I have done numerous C5/C6 vettes now with the NW 102's without a hitch. With...

Ended up throwing back on the stock 90mm and car runs perfect again...

This car is really throwing me for a loop here. I've completed a ton of 2010 Camaro tunes from bigger cams than this one, to turbos, prochargers, etc. This one has me close to checking into the...

Hey guys,

I was telling Keith about this article in an email a while ago. But I told him I'd send him a link and never did, lol.

For anyone that wants the hard press copy it is the May 2007...

Nevermind, found one in the tune repository. Open eyes, look, then post Matt :)

Never seen this file OS before in any of my files. The car is a 1999 Chevy Camaro Z28. Another shop tuned it which the customer does not have a good relationship with before. The o2 sensors were cut...