Ok i'm sure you started a support ticket. If not please do you will need to include the info.log while connected to at least one of the cars and make sure your using the most up to date version of...
Type: Posts; User: [email protected]
Ok i'm sure you started a support ticket. If not please do you will need to include the info.log while connected to at least one of the cars and make sure your using the most up to date version of...
The cars you tried to connect to are they on the supported vehicle list?
a ground from the battery neg should never be longer than 3ft. regardless if its in the front or back of the car thus battery negative to chassis in a rear mount situation.
once you're over 3 ft...
Anytime.
As long as they didn't change out the PCM it is still modded but it will have to be re-licensed since the software update will change the O/S.
ctuinstra do you have a ticket with support addressing your issue?
Anytime you replace a controller you will need to license it. Regardless if your using MPVI1 or MPVI2
check for vacuum leaks or a dead sensor
.........
The Tuning School is a very good way to learn how to Tune in general and they do a very good job covering HPtuners.
Please respond to the ticket with the Info Requested.
Diablo PCMS in the Past have just worked with our software. But they have changed something in there Mod method that now requres the PCM to be sent in to us for our mod service in order to tune with...
that is normal it is 2 credits for the PCM and 4 for the TCM
Monzsta yes the part number supersession is 68259136AB but if you keep up to date that is a non supported PCM.
from the sounds what your describing it could be a vacuum leak or something like the throttle blade closing to much killing the idle.
This is not a option for Dodge.
Javier,
Its in development there is no eta at this time. The OEM's keep making it harder and harder thus needing more time to figuer it out.
The best suggestion I can make is check out www.thetuningschool.com as dodge is a complete different way of tuning its based on torque. They have several diffrent methods of learning. And what I like...
Please send a ticket to [email protected]
I Recommend only buying our product from our website or a authorized re-seller.
At this time 2018 dodge is not supported. We will announce when support is added.
can you post your channel config.
The Scanner only clears codes stored in the PCM if the code is stored in a ABS module or in A SRS unit it will not clear the code. I know that the most basic Scan tool can not clear ABS or SRS codes.
when ever you replace a PCM you have to license it.
17-18 Corvette 6.2 4* N/A <---- from Supported Vehicles List
https://www.hptuners.com/products/vcmsuite_vehicles.php
this is a link to the supported vehicles list