13534128 is the oe part number. I got mine off ebay for 125$ cause it was just a test kinda thing. wasn't sure it would fit.
they are not a direct fit in a c5/c6 or the one year z28 that uses the...
Type: Posts; User: ???
13534128 is the oe part number. I got mine off ebay for 125$ cause it was just a test kinda thing. wasn't sure it would fit.
they are not a direct fit in a c5/c6 or the one year z28 that uses the...
I do have a amp clamp. this is at idle, with a 10% under drive crank pulley and stock pulley that come on the alt.
it's upside down lol but that's 101amps
there is a small difference between the c5 and c6 alt. you'll have to Google it, but c5 you should buy from gm, or have yours rebuild. not a auto parts store one. something throws codes, don't...
man that's a bummer. I've done a much something like that but on a much cheaper sbc engine. much less hp too..
hope you get it running.
did you put a non afm cam in it without any tuning of the ve tables you can't access? if so which cam and how does it run?
did you end up doing the cam swap?
thanks for the info, but seems no one makes a new regulatory for this newer alt. like I can't even find a replacement one for it even with the part number off from it.
guess they haven't caught up...
spark plugs? yeah just some oem replacements off rock auto. I'd have to pull a plug wire to get a part number.
seems there's a company that makes a box that ties into the can bus and tells the...
pic of it putting out 92amps at 750 rpm with a bigger than stock alt pulley and 10% under drive crank pulley.
solid 13.7v at the alt, about half a volt drop at the battery with that much load, and...
so today I put the tech 2 on it and looked around.. it has the return duty cycle % just fine to tell the ecm the load, but it just doesn't turn the L terminal on by itself.
if I command it on it...
I have an mostly stock c6, bcm still fitted. the stock alt on these cars is kinda junk. aftermarket is super expensive and still kinda blah. it's a 4 pin setup with 12 sense wire, a turn on signal at...
I figured as much, but couldn't hurt to ask.
is there an email or someplace to ask to see if a perimeter option is in a ecm but just not defined in the editor?
I see a lot of ecm's have the drop down box option to select relay control or pwm...
https://youtu.be/qiOBJj2xZbs
this guy explains it pretty well
he's wrong when he says hp doesn't work with the hybrids. it 100% does, it's just labeled backwards.
but his vlom mod and clipping...
I adjusted my speedo to correct for tire size and turned off the afm. that's all I did.
I think it's worth it over the plug in range extender thing. maybe if you can find a used v1. on a board for...
it was referenced at the bottom of. this post.
https://forum.hptuners.com/showthread.php?58429-2008-Chevrolet-Tahoe-Hybrid-support&p=706167&viewfull=1#post706167
I feel like if you want to...
I'm pretty sure he was referring to the afm. as in if I wanted to one set further than just changing the enable/disable in the drop down box, I could also set the rpm to 0 so it was off for 2...
just a quick update on the c7 fan upgrade on the c6. just back from the 2nd track day, I had also moved to an oil cooler in the radiator end tank so much more heat to dissipate, but it worked...
you ever get that alt up and running?
ouch.. definitely sounds like you wouldn't want to have it running at max all the time but sounds like it wouldn't need to be to stay cool now. hopefully you have good luck with that alt. I've seen a...
that looks like a great setup and with the thin radiator there's so much room. very nice.
I think you will have very good luck with this setup.. definitely interesting in what you find as amp...
very interesting. bit over my head, but I get the point of hp mods aren't going to do much since no access to the tcm settings.
I haven't done it, but I did think about it since 90mph speed...
interesting, I'll have to check out that alternator. I'll swing by a parts store and see what it looks like. there's a 220amp one off a 2019 3500HD suburban I've been wanting to see. supposedly it's...
that makes sense, I'm definitely on the edge of what it puts out in worse case and would agree over the edge for a daily driver. I do want to find an alt that charges a bit more at idle, but just...
just took a quick look at the wiring diagram from a camao, looks like they are running a 100amp fuse to that fan. wow.
it doesn't show me wire size, but the c7 fan uses, what comes out to about a...